Installation; Aplw 868/Aplw 869 Installation - Miele APLW 868 Installation Instructions Manual

en - Installation
24
APLW 868/APLW 869 installation
The APLW 868 charging station with wall bracket must be installed
vertically upright.
The screws for fastening the wall bracket to the wall are not included
in the scope of delivery.
Select an accessible position on the wall for the charging station.

Use the diagram to position the screws (not included in the scope

of delivery) at the correct intervals on the wall (140 mm), no. .
Use the mounting screw (included in the scope of delivery) to attach

the charger to the wall bracket, no. .
Hook the charging station (now attached to the wall bracket) onto

the screws on the wall by the lugs, no. .
1
1
2
1
Tighten the mounting screws for the charger to a maximum tighten-
ing torque of 1 Nm.