Table of Contents
Advertisement
–
This could be the case especially after the connection has been temporarily
disrupted.
–
You are at the boundary of the transmission range. While the signal is still strong
enough to maintain the connection, it is too weak to transmit sufficient data for playing
music.
The multimedia device cannot be connected, even though the flush-mounted radio is
■
displayed in the Bluetooth settings.
–
A different multimedia device is already connected to the flush-mounted radio.
–
Disconnect and uncouple the connected multimedia device in the flush-mounted
radio.
see chapter 9.3.19 "Menu "Bluetooth" – "Disconnect active device"" on page 71
see chapter 9.3.20 "Menu "Bluetooth" – "Uncoupling all devices"" on page 72
You must then couple and connect your multimedia device again because the list of
coupled devices stored in the flush-mounted radio has been deleted.
Product manual 2CKA001473B5281
Operation
│46
Advertisement
Table of Contents
