Connect Via Wi-Fi - D-Link AC1200 User Manual

Table of Contents

Section 3 - Configuration

Connect via Wi-Fi

Note: The following example uses Windows 10's built-in wireless connection utility. If you are using a different operating system, or a third-party

connection utility, the process may be different. Please refer to the documentation that came with your operating system or wireless adapter for

further information on how to connect to a wireless network.

To connect to the router using Wi-Fi, on the taskbar of your Windows, click the

or the

icon.

dlink_DWR-960-5G_xxxx

Note: If you see the

icon, unplug the network cable and try again.

By default, the network name (SSID) of the DWR-960 will be in the format dlink_DWR-960_XXXX

or dlink_DWR-960-5G_XXXX (where XXXX represents the last 4 digits of the Wi-Fi interface's MAC

address). Note that the default SSID and password can be found on the device label on the

bottom of the device .

Once you have located your DWR-960's wireless network, select it and click Connect.

dlink_DWR-960-5G_xxxx

D-Link DWR-960 User Manual

Table of Contents