return it to its original position.
The high beams are on while the lever
is pulled toward you, however, after the
lever is returned to its original position,
the low beams remain on for a certain
amount of time. Afterwards, the Auto-
matic High Beam will be activated
again.
Temporarily switching to the low
■
beams
It is recommended to switch to the low
beams when the high beams may cause
problems or distress to other drivers or
pedestrians nearby.
5-3. Operating the lights and wipers
Fog light switch
The fog lights offer improved
visibility in difficult driving
conditions, such as in rain and
fog.
Operating procedure
1
Turns the front and rear
fog lights off
2
Turns the front fog lights
on
3
Turns both front and rear
fog lights on
Releasing the switch ring returns it to
.
Operating the switch ring again turns
only the rear fog light off.
Fog lights can be used when
■
Front fog lights: The headlights or the
front position lights are turned on.
Rear fog light: The front fog lights are
turned on.
299
5