Alignment Commands
Changing Alignment Type
This command is used to define whether direct synchronization or GPS synchronization is
used for alignment. The direct synchronization method, which is the default option, relies on
the timing signals that are embedded in the SuperStream and requires a link with a constant
propagation delay to establish system synchronization. The GPS synchronization method uses
timing information from the global positioning system satellites for system synchronization.
The options field defines whether the GPS synchronization method uses GPS with fallback
enabled or disabled.
1.
From the Alignment menu, use the
Change Alignment Type
Figure 3-5: Alignment Menu—Change Alignment Type
The Select Alignment Type screen appears (see Figure 3-6).
3-6
RF-Conductor! Controller NIU Remote Configuration
to position the cursor to the left of the listing
<tab>
and press:
(see Figure 3-5).
<Return>
6880494G55-O
May 1998