Areas Of Application; Blind Spot Detection; Lane Change Assist; Rear Cross Traffic Assist With Braking - Bosch CR5CBCC User Manual

From
XC-DA/ECR3-Bp
Report
Issue 1.0
Topic CR5CBCC User Manual
rear of vehicle, at higher speeds, the CR5CBCC operates in long-range mode, monitoring area
behind vehicle for small, fast approaching targets (like motorbikes).
4.2

Areas of application

The CR5CBCC is the base for range of safety and driver assistance functions. In particular, the
CR5CBCC can be used for the following functions:
4.2.1

Blind spot detection

Optical and/or acoustic warning of the driver if a vehicle is detected in the Blind Spot Zone in
order to avoid unsafe lane change or turn maneuvers of the driver.
4.2.2

Lane change assist

Optical and/or acoustic warning of the driver if an approaching vehicle is detected in the
neighboring lanes in the area behind the Blind Spot Zone in order to avoid unsafe lane change
or turn maneuvers of the driver.
4.2.3

Rear Cross Traffic Assist with braking

Optical and/or acoustic warning of the driver on vehicles crossing the estimated path of the ego
vehicle in the rear area (e.g. backing out of parking spaces).
4.2.4

Door opening warning

The door opening warning (DOW) feature shall detect target vehicle in the door opening
warning zones. DOW feature warns the driver and passengers against collisions that may occur
with target vehicle passing the subject vehicle from behind within a specific lateral distance from
subject vehicle's relevant side when subject vehicle is at standstill and the door is to be opened.
It supports the driver and passengers of the subject vehicle when leaving the vehicle.
4.2.5

Rear collision warning

Warning to the target vehicle if it is approaching the subject vehicle from behind and there is a
chance of collision.
4.2.6

Front Cross Traffic Assist - Information

Optical visualization of the time based criticality of the approaching vehicle, crossing in front of
the vehicle. The front cross traffic assist-Information function is designed to inform the driver at
stand-still or during drive-off / acceleration phase at intersection scenarios or while leaving a
parking spot.
Our Reference
Daniel Radics
Tel
+36 1 879-6276
CR5CBCC_User_manual.docx
Budapest
10 June 2021
Page 6 of 17