Nokia 3650 User Manual page 149

• My Bluetooth name - Define a Bluetooth name for your phone. After you have set
Bluetooth to be active and changed
be seen by other Bluetooth device users.
Tip! When searching for devices, some Bluetooth devices may show only the
unique Bluetooth addresses (device addresses). To find out the unique Bluetooth
address of your phone, enter the code *#2820# in standby mode.
Sending data via Bluetooth
Note: There can be only one active Bluetooth connection at a time.
1 Open an application where the item you wish to send is stored. For example, to send
a photo to another device, open the Images application.
2
Scroll to the item you want to send, for example, a photo and select
→
Via Bluetooth.
3
The phone starts to search for devices within range. Bluetooth enabled devices that
are within range start to appear on the display one by one. See Fig. 3, p. 149. You can
see a device icon, the device's Bluetooth name, the device type, or a short name.
Paired devices are shown with
Note: If you have searched for Bluetooth devices earlier, a list of the devices
that were found previously is shown first. To start a new search, select
devices. If you switch off the phone, the list of devices is cleared and the device
search needs to be started again before sending data.
•
To interrupt the search, press Stop. The device list freezes and you can start to form
a connection to one of the devices already found.
4 Scroll to the device you want to connect with and press Select. The item you are
sending is copied to Outbox and the note
My phone's visibility to Shown to
.
Connecting is shown.
all, this name can
via Bluetooth (instead of
text messages), go to
Notes, write the text, and
select Options
via Bluetooth.
→
Options Send
More
Fig. 3 Sending an image
via Bluetooth, the
phone starts to search
for devices.
Tip! To send text
→ →
Send