Electrolux Frigidaire Use & Care Manual page 18

18
SETTING SURFACE CONTROLS
Bridge Function
The Bridge function allows you to use an
extra-long piece of cookware such as a
griddle on the left side of your cooktop.
If one of the left cook zones is active
and cookware is detected in both of the
left zones, the bridge function becomes available
and the Bridge Indicator will light up.
ON
OFF
Figure 19: Bridge Indicator
Touch the Bridge Indicator to activate the bridge
function. The Bridge Indicator will turn red. The
cook zone indicator for the other bridge cook zone
will also turn red, and the cook zone setting for
both of the bridged zones will match. The setting
controls for the front left zone will control both of
the bridged zones as long as the bridge function is
active.
ON
OFF
LOCK
ON
OFF
POWER
Figure 20: Active bridge function
At any time, you can change the setting for the
bridged cook zones by pressing the number of the
new setting on the active control.
To deactivate the bridge function, press the Bridge
Indicator or deactivate one of the bridged cooking
zones by pressing its On/Off key.
1
1
1
To activate Serve Warm, press the Serve Warm In-
dicator. The indicator will turn red, and you will see
the settings change on the active cooking zones.
To deactivate Serve Warm, press the Serve Warm
Indicator again. All of the active cooking zones will
turn off . You can also press the main Power key to
turn the cooktop off .
CAUTION
Serve Warm is not intended to cook food.
Only use Serve Warm with food that is already
cooked. Cover pots with lids to maintain proper
9 P
serving temperature.
9 P
9 P
Serve Warm
Serve Warm allows you to keep
cooked food warm for serving.
When you activate Serve Warm,
all active cooking zones will be set
to a low setting.