Sharp PN-L803C Service Manual page 25

1 – 3.CONNECTING PERIPHERAL EQUIPMENT
(Caution)
• Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting cables. Also,
read the manual of the equipment to be connected.
• Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables connected to
the input and output terminals may cause malfunctions and the other problems.
• Do not use any cable that has a damaged or deformed terminal. Using such cables may cause malfunctions.
(MEMO)
- When using a touch panel with a computer connected to the monitor, connect the USB cable to the computer. For details, see the Touch
Panel Settings Tool Operation Manual.
- Images may not be displayed properly depending on the computer (video card) to be connected.
- Use the automatic screen adjustment when a computer screen is displayed for the first time using D-SUB1 or D-SUB2, or when the
setting of the computer is changed.
The screen is adjusted automatically when SELF ADJUST in the MONITOR menu is set to ON.
- If the audio output from the playback device is connected directly to speakers or other devices, the video on the monitor may appear
delayed from the audio portion.
Audio should be played through this monitor by connecting the playback device to the monitor's audio input, and connecting the
monitor's audio output to the speakers or other devices.
- The audio input terminals used in each input mode are factory-set as follows.
Input mode
D-SUB1
D-SUB2
DisplayPort
HDMI1
HDMI2
HDMI3
PN-L803C/80TC3 INSTALLATION, ADJUSTMENT, SETTING, OPERATION 2 - 3
Audio input terminal (Factory setting)
Audio 1 input terminal
Audio 2 input terminal
DisplayPort input terminal
HDMI 1 input terminal
HDMI 2 input terminal
HDMI 3 input terminal
1. HDMI 1 input terminal
2. HDMI 2 input terminal
3. HDMI 3 input terminal
4. DisplayPort input terminal
5. D-sub 1 input terminal
6. D-sub 2 input terminal
7. Audio 1 input terminal
8. Audio 2 input terminal
9. DisplayPort output terminal
10. Audio output terminal
11. Touch pen adapter port
12. USB 1 (type B) port
13. USB 2 (type B) port
14. RS-232C input terminal
15. LAN terminal
16. External speaker terminals
17. USB cable