Table of Contents
Advertisement
Additional Options
Display
+
[Ctrl]
[Ctrl]
[A]
[A]
[Ctrl]
[Ctrl]
[A]
[A]
This option determines whether the
Press <Ctrl> <A> for SCSISelect (TM) Utility!
message appears on your screen during system startup.
If this setting is disabled, you can still invoke the
system startup.
The message is displayed during startup (default entry).
Enabled
The message is not displayed during startup.
Disabled
Multiple LUN Support
This option determines whether booting from a SCSI device that has multiple LUNs
(Logical Unit Numbers) is supported.
The SCSI device will be used as the startup drive.
Enabled
The SCSI device will not be used as the startup drive (default entry).
Disabled
BIOS Support for Bootable CD-ROM
This option determines for booting from a CD-ROM drive.
It is possible to boot from the CD-ROM (default entry).
Enabled
It is not possible to boot from the CD-ROM.
Disabled
BIOS Support for Int 13 Extensions
This option determines whether the SCSI BIOS supports disks with more than 1024
cylinders. The default setting is
Hard disk drives with more than 1024 cylinders are supported (default
Enabled
entry).
Hard disk drives with more than 1024 cylinders are not supported.
Disabled
Support for Ultra SCSI Speed
This option determines whether the SCSI controller BIOS supports the fast transfer rate
40 Mbyte/s at 16-bit data transfer.
40 Mbyte/s transfer rate is supported.
Enabled
The function is disabled (default entry).
Disabled
Change the default setting if you have connected ultra-wide SCSI devices to
i
the SCSI controller.
24 - English
Message During BIOS Initialization
Enabled
SCSI Setup
.
by pressing
+
[Ctrl]
[Ctrl]
[Ctrl]
[Ctrl]
A26361-D992-Z121-2-7419
at
[A]
[A]
[A]
[A]
Advertisement
Table of Contents
