Samsung SPH-M820 User Manual page 166

To connect to a Wi-Fi network:
1.
Press
>
Wireless & networks > Wi-Fi settings.
The network names and security settings (Open
network or Secured with WEP) of detected Wi-Fi
networks display in the Wi-Fi networks section.
Note:
When you select an open network, you will be
automatically connected to the network.
2.
To manually add your new network connection:
Tap
Add Wi-Fi network
Enter the Network SSID. This is the name of your
Wi-Fi network.
Tap the
Security
This must match the current security setting on
your target network.
If secured, enter your WAP's password. The
password option
type it instead of only showing asterisks (****).
Tap to store the new information and
Save
connect to your target network.
153 3B. Web and Data Services
and tap
>
.
field and select a security option.
, reveals the password as you
Note:
The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the wireless password again, unless
you reset your device back to its factory default settings.
To manually scan for a Wi-Fi network:
1. Press
Wireless & networks > Wi-Fi settings.
2.
Press
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status
at a glance:
– Wi-Fi is connected and active.
– Wi-Fi active but there is a communication
issue with the target Wireless Access Point
show
(WAP).
Using the Wi-Fi Settings Menu
The
Wi-Fi settings - Advanced
up many of your device's Wi-Fi service, including:
Setting your Wi-Fi sleep policy
and tap
>
and tap .
Scan
menu allows you to set
>