Turning The Power On And Off; Led Displays And The Camera Status - Canon VC-C4 Instruction Manual

Before You Use the Product

Turning the Power ON and OFF

The VC-C4/VC-C4R camera itself does not have a power switch. You can switch the camera on
by plugging the AC adapter into a wall outlet. When power to the camera is switched on, the
LED on the camera turns green. If the monitor is switched on, an image appears on the screen.
AC cable
NOTE

LED Displays and the Camera Status

Green
Blinking green
Orange
Blinking orange
Red
Off
14
to AC outlet
AC adapter
Whenever you turn the power on, first press any button on the wireless
controller. This initializes the camera head position. Initialization takes several
seconds. During initialization, the LED on the camera flashes green (at 1-second
intervals).
Never touch the camera head during initialization as this could prevent successful
initialization and cause faults.
Wait at least five seconds before turning the power back on after shutting it off.
Turning it on too quickly may result in a malfunction. Observe the precautions
given in "a Safe Use of Equipment/a IMPORTANT SAFETY INSTRUCTIONS"
( P.5–7).
LED Display
At 0.1-sec. intervals
At 0.5-sec. intervals
At 1-sec. intervals
At 0.1-sec. intervals
At 0.5-sec. intervals
Camera
Camera Status
Camera is on. ( P.21)
Wireless controller button being used.
Storing or restoring a preset (
a setting menu. ( P.22)
Camera head position initialization in progress.
Individual camera operation in progress and this camera
is not selected. ( P.30)
Camera is not selected for individual operation and is being
controlled from the wireless controller. (
The camera is being selected or deselected for
individual operation. ( P.30)
Camera is off. ( P.21)
Power is off.
Monitor
P.20), or displaying
P.30)