Safety Instructions; Product Description And Specifications; Product Features - Bosch Professional GLI 18V-300 Original Instructions Manual

English

Safety Instructions

Safety instructions for cordless worklights
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Save all safety and general instructions for future refer-
ence.
Please read and observe all safety and general instruc-
u
tions included with the battery or with the power tool sup-
plied with the battery.
Handle the worklight with care. The worklight produces
u
intense heat which increases the risk of fire and explo-
sion.
Do not work with the worklight in potentially explos-
u
ive areas.
Do not continue to press the On/Off switch after the
u
worklight has been automatically switched off. The
battery can be damaged. Ensure that the battery is
charged and that the worklight has cooled before switch-
ing on the worklight again.
Use only original Bosch accessories.
u
The light source cannot be replaced. If the light source
u
is defective, the entire cordless worklight must be re-
placed.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
If used incorrectly or if the battery is damaged, flam-
u
mable liquid may be ejected from the battery. Contact
with this liquid should be avoided. If contact accident-
ally occurs, rinse off with water. If the liquid comes
into contact with your eyes, seek additional medical
attention. Liquid ejected from the battery may cause ir-
ritation or burns.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
When the battery is not in use, keep it away from pa-
u
per clips, coins, keys, nails, screws or other small
metal objects that could make a connection from one
terminal to another. A short circuit between the battery
terminals may cause burns or a fire.
Do not open the battery. There is a risk of short-circuit-
u
ing.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Bosch Power Tools
Protect the worklight against heat, e.g.
against continuous intense sunlight, fire,
water, and moisture. There is a risk of explo-
sion.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Only charge the batteries using chargers recommen-
u
ded by the manufacturer. A charger that is suitable for
one type of battery may pose a fire risk when used with a
different battery.
Remove the batteries from the worklight before carry-
u
ing out any work on the worklight (e.g. assembly,
maintenance, etc.) as well as when transporting and
storing the worklight. There is risk of injury from unin-
tentionally pressing the on/off switch.
Do not direct the light beam at persons or animals and
u
do not stare into the light beam yourself (even from a
distance).
Do not use the worklight in road traffic. The worklight
u
is not permitted for illumination in road traffic.
Do not cover the lamp head while the cordless work-
u
light is operating. The lamp head warms up during oper-
ation and can cause burns if this heat accumulates.
Do not allow children to use the cordless worklight. It
u
is intended for professional use. Children can uninten-
tionally blind themselves or other persons.
Product Description and
Specifications
Intended Use
The cordless worklight is intended for mobile illumination in
a limited space and for a limited time in indoor and outdoor
areas and is not suitable for general room lighting.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
a)
(1) Battery pack
a)
(2) Battery unlocking button
(3) Lamp head
(4) On/Off switch
English | 5
1 609 92A 5X6 | (26.04.2021)