Rec Mode: Selecting The Continuous Shooting Method - Sony DSC-W200 Handbook

Shooting menu

REC Mode: Selecting the continuous shooting method

Selects whether the camera performs continuous shooting or not when you press the shutter button.
(Normal)
(Burst)
BRK ±0.3EV
BRK ±0.7EV
BRK ±1.0EV
On the Burst
• When recording with the self timer, a series of a maximum of five images is recorded.
• When recording with the mode dial set to M, you cannot select a shutter speed of 1/3 seconds or slower.
• The recording interval is approximately 0.5 seconds. The recording interval becomes longer, depending
on the setting for the image size.
• When the battery level is low, or when the internal memory or "Memory Stick Duo" is full, the Burst
stops.
On the Exposure Bracket
• The focus and white balance are adjusted for the first image, and these settings are also used for the other
images.
• When recording with the mode dial set to M, you cannot select a shutter speed of 1/3 seconds or slower.
• When the exposure is manually adjusted (page 44), the exposure is shifted based on the adjusted
brightness.
• The recording interval is approximately 0.5 seconds.
• If the subject is too bright or too dark, you may be unable to shoot properly with the selected bracket step
value.
42
For details on the operation 1 page 38
Does not shoot continuously.
Records up to 100 images in succession when you press and
hold down the shutter button.
• The flash is set to
Records a series of three images with the exposure values
automatically shifted (Exposure Bracket).
The larger the bracket step value, the larger the shift of the
exposure value.
• When you cannot decide the correct exposure, shoot in the
Exposure Bracket mode, shifting the exposure value. You can
select the image with the best exposure afterward.
• When the mode dial is set to
not available.
• The flash is set to
(Flash forced off).
, the Exposure Bracket mode is
(Flash forced off).