Table of Contents
Advertisement
1
2
763-124a
763-231
2
1
763-238a
Economy control switch
1 "I" (ON)
When the economy control switch is turned to "I" (ON),
the economy control unit controls the engine speed
according to the connected load. The results are bet-
ter fuel consumption and less noise.
2 "3" (OFF)
When the economy control switch is turned to "3"
(OFF), the engine runs at the rated r/min (3,800 r/min)
regardless of whether there is a load connected or
not.
TIP
The economy control switch must be turned to "3"
(OFF) when using electric devices that require a large
starting current, such as a compressor or a submers-
ible pump.
DC protector
The DC protector turns off automatically when electric
device being connected to the generator is operating
and current above the rated flows. To use this equip-
ment again, turn on the DC protector by pressing its
button to "
I" (RESET).
1 "
I" (RESET)
Direct current is output. (This is the default position.)
2 "
3" (OFF)
Direct current is not output.
NOTICE
Reduce the load of the connected electric device
below the specified rated output of the generator
if the DC protector turns "
protector turns "
device immediately and consult a Yamaha dealer.
– 10 –
3" (OFF). If the DC
3" (OFF) again, stop using the
Advertisement
Table of Contents
