Configure Task And Voiceconsole; Proglove Mark Basic Wearable Scanner; Device As Initiator; Proglove Mark 2 Wearable Scanner - Honeywell A700 Hardware Reference Manual

Configure Task and VoiceConsole

1. Set the following advanced parameter in Task config
barcodeport = bt_scan
2. Turn on Bluetooth on the device.
3. View the properties of the device and ensure Bluetooth is enabled. If it is not enabled, click
Edit this device and set Bluetooth Enabled to "enabled".
4. Select Pair this device with a peripheral.
5. For Pairing type select "Bluetooth Scanner".
6. For Connection Mode select "Device listens for peripheral connection".
7. Set Security to "Enabled" or "Disabled" as desired.
8. If security is enabled, enter the security key as "12345" or a custom PIN if set.
9. Click Pair with peripheral to initiate pairing.

ProGlove MARK Basic Wearable Scanner

The ProGlove MARK Basic scanner is a BLE (Bluetooth Low Energy) device.
VoiceCatalyst 4.3.1 or greater is required
l
VoiceConsole 5.4 (with ECS016) or greater is required.
l
IMPORTANT
ProGlove BLE scanners must be connected using a FriendlyName bar code. Also, the A700x
is always the initiator. No other pairing method is possible with this scanner. Contact
Technical Support for a FriendlyName bar code.

Device as initiator

Configure Task and VoiceConsole
1. Set the following advanced parameter in Task config
barcodeport = bt_scan
2. Turn on Bluetooth on the device.
3. View the properties of the device and ensure Bluetooth is enabled. If it is not enabled, click
Edit this device and set Bluetooth Enabled to "enabled".
4. Select Pair this device with a peripheral.
5. For pairing type, select "BLE Scanner".
6. Give the pairing a name.
7. Enter the FriendlyName which must match the bar code.
8. Click Pair with peripheral to initiate pairing.
9. Scan the FriendlyName bar code with the scanner.
10. Scanner beeps when connected,

ProGlove MARK 2 Wearable Scanner

The ProGlove MARK 2 scanner is a BLE (Bluetooth Low Energy) device.
VoiceCatalyst 4.3.1 or greater is required
l
VoiceConsole 5.4 (with ECS016) or greater is required.
l
Voice Device and Headset Hardware Reference Guide 186