Specifications - Sony DVP-NS300 Operating Instructions Manual

Specifications

System
Laser
Signal format system
Audio characteristics
Frequency response
Signal-to-noise ratio (S/N ratio)
Harmonic distortion
Dynamic range
Wow and flutter
The signals from LINE OUT L/R (AUDIO) 1/2 jacks are measured. When you play PCM sound tracks with a 96 kHz
sampling frequency, the output signals from the DIGITAL OUT (COAXIAL and OPTICAL) jacks are converted to
48 kHz sampling frequency.
Outputs
Jack name
DIGITAL OUT (COAXIAL) Phono jack
DIGITAL OUT (OPTICAL)
LINE OUT (AUDIO) (1, 2)
LINE OUT (VIDEO) (1, 2)
S VIDEO OUT
COMPONENT
VIDEO OUT (Y,C ,C )
B R
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Supplied accessories
See page 14.
Specifications and design are subject to change without notice.
Semiconductor laser
NTSC/PAL (See page 59 to switch)
DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1.0 dB)
DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
115 dB (LINE OUT L/R (AUDIO) jacks 1, 2 only)
0.003 %
DVD: 103 dB
CD: 99 dB
Less than detected value (±0.001 % W PEAK)
Jack type
Optical output jack
Phono jack
Phono jack
4-pin mini DIN
Phono jacks
220 to 240 V AC, 50/60 Hz
220 V AC, 50/60 Hz
220 V AC, 60 Hz
110 V AC, 60 Hz
See page 2 for further information.
12 W
See page 2 for further information.
430 74 256 mm (width/height/depth) incl. projecting parts
2.7 kg
5 C to 35 C
25 % to 80 %
Maximum output level
0.5 Vp-p
-18 dBm
2 Vrms (50 kilohms)
1.0 Vp-p
Luminance signal: 1.0 Vp-p
Colour signal: 0.3 Vp-p (PAL)
0.286 Vp-p
(NTSC)
Y: 1.0 Vp-p
C , C : 0.7 Vp-p
B R
Load impedance
75 ohms terminated
Wave length: 660 nm
Over 10 kilohms
75 ohms, sync negative
75 ohms, sync negative
75 ohms terminated
75 ohms, sync negative
75 ohms terminated
69