Table of Contents
Advertisement
3.6
Security
Change User/Administrator Password
You can set a User Password once an Administrator Password is set. The password will
be required during boot up, or when the user enters the Setup utility. Please Note that
a User Password does not provide access to many of the features in the Setup utility.
Select the password you wish to set, press Enter to open a dialog box to enter your
password (you can enter no more than six letters or numbers). Press Enter to confirm
your entry, after which you will be prompted to retype your password for a final
confirmation. Press Enter again after you have retyped it correctly.
Removing the Password
Chapter 3 – AMI BIOS Setup
45
Advertisement
Table of Contents
