Yamaha KCA-M538F User Manual page 12

2.2 Windows 2000
・ When plugging the KCA-M538F USB Serial Port into the USB port of your PC, "KCA-
M538F-000" is shown.
・ When you use the driver software for the USB cable that has been copied into the support
software installation folder to install the driver software, select [Specify a location] and click
the [Next] button.
Click the [Browse ... ] button in the "Found New Hardware Wizard" window, specify [Driver]-
NOTE
[WinXP-Vista-7-8.1] folder contained in the support software installation folder, and then
click [OK].
For details about support software installation folders, see "2.1 USB cable applicable
support software".
Window searches for the driver file.
5
When the driver file is found, click [Next] to continue.
Finish the driver installation.
6
When the dialog box appears indicating the driver software has been successfully
installed, click the [Finish] button.
Dialog box indicating the driver has been installed
Install the USB serial port.
7
The "Found New Hardware Wizard" dialog box appears again.
Click the [Next] button.
8
2. Driver software setup
Click