Sharp IG-HH1A Operation Manual page 16

USEFUL FUNCTIONS
Ion mode operation
Plasmacluster ions are generated in all operation modes.
*Plasmacluster Ions mode and Clothes Deodorizing mode will be automatically switched to cool fan operation.
(While in operation)
1
Remote controller
Normal operation mode
● Please use normal operation mode.
(Light Off)
Plasmacluster Ion mode (fan operation)
● Plasmacluster ions will be blown to a larger area.
● The operation will stop automatically after 1 hour of fan operation at fan speed "6", with horizontal
Clothes Deodorizing mode (fan operation)
● Plasmacluster ions in the airflow directed to the clothes can remove the odor.
● The operation will stop automatically after 2 hours of fan operation at fan speed "6", with horizontal
● To use the Clothes Deodorizing mode, place the main unit near the clothes, so airflow can be directly projected to the
clothes before starting the operation.
To achieve effective deodorizing effect, you can place the clothes right in front of the main unit.
● When changing hot fan/foot warming operation, fan speed, timer, vertical swing angle in Plasmacluster Ions mode or
Clothes Deodorizing mode, the unit will switch to normal operation mode.
Child lock
"Enabled"
Main unit
● In the consideration of safety and applicability, the following operations can be carried out even if child lock is
set.
CAUTION
While in operation
IG-HH1A_0607.indd 15
Select the appropriate Ion mode. (Three modes are available as follows.)
(Off)
swing at 90° and vertical swing ON.* Dust and pollen removal function is not available.
swing at 60° and vertical swing ON.
"Disabled"
Main unit
Pip
● Press 3 seconds
or more.
● Operation button "Off"
● Cancel the child lock.
(continued)
Pip
● It is impossible to enable/disable
the child lock with the remote
control.
Pip Pip
● Press 3 seconds
or more.
While not in operation
E-15
Pip Pip Pip
● Cancel the child lock.
2017/06/13 13:24:21