Table of Contents
Advertisement
Dialogue Lift (Dialog Lift)
Adjusts the perceived height of dialogue sounds. If the dialogue sounds as if it is coming from
below the TV screen, you can raise its perceived height by increasing this setting.
X
This setting is available only when one of the following conditions is met.
– One of the sound programs (except for 2ch Stereo and 7ch Stereo) is selected when front presence speakers are
used.
– Virtual Presence Speaker (VPS) (p.61) is working.
(You may hear dialogue sounds from the surround speakers depending on the listening position.)
Setting range
0 to 5 (The bigger the value the higher the position)
■
Lipsync (Lipsync)
Adjusts the delay between video and audio output.
Setting range
0 ms to 500 ms (1 ms increments)
X
This setting is available only when "Delay Enable" (p.117) in the "Setup" menu is set to "Enable" (default).
Ideal position
En
■
Enhancer (Enhancer)
Enables/disables Compressed Music Enhancer and the high-resolution mode.
Enhancer (Enhancer)
Enables/disables Compressed Music Enhancer (p.66).
X
• This setting is applied separately to each input source.
• You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer (p.66).
Settings
Off (Off)
Disables Compressed Music Enhancer.
On (On)
Enables Compressed Music Enhancer.
Default
TUNER, Bluetooth, USB, (network sources): On (On)
Others: Off (Off)
Y
Compressed Music Enhancer does not work on the following audio sources.
– Signals whose sampling frequency is over 48 kHz
– DSD audio
Hi-Res Mode (HiRes Mode)
Enables/disables the high-resolution mode when "Enhancer" is set to "On". If this function is
set to "On", you can enhance the quality of uncompressed digital audio (such as 2-channel
PCM and FLAC) using Compressed Music Enhancer.
Settings
Enables the high-resolution mode.
On (On)
(The high-resolution mode may not work depending on the audio signal
processing condition.)
Off (Off)
Disables the high-resolution mode.
104
Advertisement
Table of Contents
