Related Manuals for LG F8091 Series
Summary of Contents for LG F8091 Series
- Page 1 F8091(Q, T )D(T,P)(2,A)(0~9) F1091(Q, T )D(T,P)(2,A)(0~9) F1291(Q, T )D(T,P)(2,A)(0~9) F1491(Q, T )D(T,P)(2,A)(0~9) W918002QT *MFL66989215* MFL66989215...
-
Page 2: Table Of Contents
roduct Features Protection against creases With the alternate rotation of the drum, creasing in the laundry is minimized. uilt-in heater Internal heater automatically heats the water to the best temperature on selected cycles. More economical by Intelligent Wash System Intelligent Wash System detects the amount of load and water temperature, and then determines the optimum water level and washing time to minimize energy and water consumption. -
Page 3: Warnings
arnings READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE For your safety, the information in this manual must be followed to minimize WARNING! the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life. IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire, electric shock, or injury to persons when using... -
Page 4: Specifications
pecifications Name : Front loading washing machine Power supply : 220V~,50Hz / 220V~,60Hz 230V~,50Hz / 240V~,50Hz 550mm(D) 850mm(H) Weight/Max.Watt : 61kg / 2100W Wash capacity : Refer to the Rating Label Water consumption : 49 Permissible water pressure : 1.0-10kgf/cm (100-1000kPa) No Spin/400/600/800 Spin speed... -
Page 5: Installation
nstallation Install or store where it will not be exposed to temperatures below freezing or exposed to the weather. Properly ground washer to conform with all governing codes and ordinances. The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor. - Page 6 nstallation Installation place requirement Level floor : Drain Hose Allowable slope under entire washer is 1˚ Washer Power outlet : Must be within 1.5 meters of either side of location of washer. Do not overload the outlet with more than one appliance.
- Page 7 nstallation Electrical connection 1. Do not use an extension cord or double adapter. 2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard. 3.
- Page 8 nstallation Normal Tap without thread & screw type inlet hose Unscrew the fixing screw to Push the connector up till the Push the water supply hose attach the tap. rubber packing is in tight contact vertically upwards so that the with the tap.
- Page 9 nstallation This equipment is not designed for maritime use or for use mobile installations such as caravans, aircraft etc. Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday), especially if there is no floor drain(gully) in the immediate vicinity. When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the door lock to prevent young children being trapped inside.
- Page 10 • If possible install the washer in one of the corners of the room, where the floor is more stable. Insert the rubber cups to reduce vibration. You can obtain the rubber cups from the LG spares dept. Important! Proper placement and levelling of the washer ensure long,regular and reliable operation.
-
Page 11: Care Before Washing
are before washing Before the first washing Select a cycle (COTTON 60°C, add a half load of detergent) allow the unit to wash without clothing. This will remove residues and water from the drum that may have been left during manufacturing. Caring before washing 1. -
Page 12: Adding Detergent
dding detergent Adding detergent and fabric softener 1. The Dispenser Drawer • Main wash only ➔ • Pre Wash + Main Wash ➔ 2. Adding Fabric Softener • Do not exceed the maximum fill line. Close the dispenser drawer slowly. Overfilling can cause early dispensing of the fabric softener which could stain clothes. - Page 13 dding detergent ❋ Tips 3. Detergent dosage Full load : according to • The detergent should be used according to the manufacturer’s recommendation. instruction of the detergent manufacture. Part load : 3/4 of the normal amount. • If too much detergent is used, too many suds Minimum load : 1/2 of full load.
-
Page 14: Function
unction Recommended courses according to the laundry type Program Fabric Type Proper Temp. Option Maximum Load Color fast gaments (shirts, night 60˚C Rating dresses, pajamas, etc) and normally Cotton (Cold, 30˚C, soiled cotton load(underwear...) 40°C,95°C) Medic Rinse Intensive Synthetic Polyamide, Acryic, Polyester Pre Wash 40˚C Crease Care... - Page 15 1400 800 : F8091(Q,T)D(T,P)(2,A)(0-9) , W918002QT 1000 : F1091(Q,T)D(T,P)(2,A)(0-9) 1200 : F1291(Q,T)D(T,P)(2,A)(0-9) [F8091(Q,T)D(T,P)(2,A)(0~9)],[W918002QT] [F1091(Q,T)D(T,P)(2,A)(0~9)] [F1291(Q,T)D(T,P)(2,A)(0~9)] [F1491(Q,T)D(T,P)(2,A)(0~9)]...
- Page 16 [F8091(Q,T)D(T,P)(2,A)(0~9)],[W918002QT] [F1091(Q,T)D(T,P)(2,A)(0~9)] [F1291(Q,T)D(T,P)(2,A)(0~9)] [F1491(Q,T)D(T,P)(2,A)(0~9)]...
-
Page 17: How To Use Washer
ow to use washer Start/Pause Option By pressing the Option button, all Option functions may be selected. 1. Start This Start/Pause button is used to start 2. Pause 1. Medic Rinse needed, press the Start/Pause button. rinse operation you can choose Medic Rinse option. - Page 19 ow to use washer Spin • After selecting the spin course, the spin speed can be chosen by pressing the spin button. [F1091(Q,T)D(T,P)(2,A)(0~9)] [F8091(Q,T)D(T,P)(2,A)(0~9)], [F1491(Q,T)D(T,P)(2,A)(0~9)] [F1291(Q,T)D(T,P)(2,A)(0~9)] [W918002QT] 1. Spin selection 2. No spin • Spin Speed is available according to •...
- Page 20 ow to use washer Water Temp. Display - Cold 1. Special function display - 30˚C / 40˚C / 60˚C / 95˚C “ ” 2. Self diagnosis display The required temperature lamp will light up for identification. For the more detailed information, please refer to the page14.
-
Page 21: Maintenance
aintenance Before cleaning the washer interior, unplug the electrical power cord to avoid electrical shock to avoid electrical shock hazards. When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the door lock to prevent young children being trapped inside. The water inlet filter - Pre wash and Crease care button light will Blink, when water does not enter the detergent drawer. - Page 22 aintenance The drain pump filter The drain filter collects threads and small objects left in the laundry. Check regularly that the filter is clean to ensure smooth running of your machine. CAUTION First drain using the drain hose and then open the pump filter to remove whatever any threads or objects.
- Page 23 aintenance Dispenser drawer After a while detergents and fabric softeners leave a deposit in the drawer. • It should be cleaned from time to time with a jet of running water. • If necessary it can be removed completely from the machine by pressing the catch downwards and by pulling it out.
- Page 24 aintenance Cleaning your washer 1. Exterior Proper care of your washer can extend its life. The outside of the machine can be cleaned with warm water and a neutral non abrasive household detergent. Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with sharp objects.
- Page 25 roubleshooting guide This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately When the machine does not function properly or does not function at all, check the following points before you contact your service provider.
- Page 26 roubleshooting guide Symptom Possible Cause Solution Washer does not start • Electrical power cord may not Make sure plug fits tightly in wall be plugged in or connection outlet. may be loose. • House fuse blown, circuit Reset circuit breaker or replace fuse. breaker tripped,or a power Do not increase fuse capacity.
- Page 27 roubleshooting guide Symptom Possible Cause Solution Check another tap in the house. Water supply is not adequate in area. Fully open tap. Water supply taps are not completely open. Straighten hose(s). Water inlet hose(s) are kinked. Check the filter of the inlet hose. The filter of the inlet hose(s) are clogged.
- Page 28 roubleshooting guide Symptom Possible Cause Solution...
-
Page 30: Terms Of Warranty
erms of Warranty Disposal of your old appliance separately from the municipal waste stream via designated authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. service or the shop where you purchased the product. What Is Not Covered: Service trips to your home to teach you how to use the product.