Installing and Removing the Battery
Installing the Battery
If the battery's rubber lining (to repel water) is not clean, use
a moist cotton swab to wipe it clean.
Checking the Battery Level
4
When the <
indicated as follows:
20
1
2
> switch is set to <
Detach the battery compartment
cap.
¡Grasp both sides of the cap and pull it
off.
Insert the battery.
¡Insert the battery and while pushing it
in, turn the release handle as shown
by the arrow.
Rubber lining
1
> (p.27), the battery level will be
z
: Battery level OK.
x
: Battery level is low.
b
: Battery will be exhausted soon.
n
: Battery must be recharged.