Dvi (Digital Visual Interface) Input Connection; Special Remote Buttons; Bbe Button; Aspect Button - Panasonic PT-47WX54 Operating Instructions Manual

Optional Equipment Connections (cont.)

DVI (Digital Visual Interface) input connection

1
The DVI/HDCP input on your PTV can accommodate copy
protected digital programming. The DVI/HDCP input
terminal complies with the EIA-861Profiles
not intended for use with personal computers. The DVI/
HDCP input can be connected to an EIA/CEA 861
compliant consumer electronic device, such as a set top
box or DVD player equipped with a DVI output connection
The DVI/HDCP input is designed for best performance with
HDTV signals, such as 1080i. The DVI/HDCP input will
also accept and display 480i and 480p picture signals.
Notes:
1. DVI/HDCP = Digital Visual Interface / High-Bandwidth
Digital Copy Protection.
2. EIA/CEA-861 Profiles compliance covers profiles for
transmission of uncompressed digital video including
high bandwidth digital content protection.
3. Consult your consumer electronics dealer for availability
details.
Follow the diagram below to connect the PTV to a set top
box or a DVD player.
TERMINALS ON BACK OF PROJECTION TELEVISION
VIDEO
DIGITAL
Y
IN
ANT 1
P
B S-VIDEO
VIDEO
P
R
L L
SPLIT OUT
R
R
1 2
ANT 2
AUDIO COMPONENT INPUT INPUT INPUT PROG
TO AUDIO
VIDEO INPUT 1 2 3 OUT AMP
Procedure
• Press TV/VIDEO button on the remote control to select
DIGITAL-IN input.
• Connect the DVI output from the set top box or a DVD
player to the DIGITAL IN input on the back of the PTV.
• Connect the Audio Out signal from the set top box or
DVD player to the L and R Audio inputs associated with
the DIGITAL IN input.
2
standard and is
DVI OUT JACKS ON BACK OF STB OR
DVD PLAYER
AUDIO OUT
DVI OUT L R
L
AUDIO
R
CABLES NOT SUPPLIED
O
PTIONAL

Special Remote Buttons

BBE Button

Press this button to turn BBE sound feature On or Off.
SAP Button
Press this button to let you cycle through different audio modes.
For example:
• If receiving STEREO, SAP and MONO or receiving
STEREO and MONO only, pressing SAP button,
the audio will toggle as follows:
3
.
STEREO

ASPECT Button

Customer Options depending on Component Input Signal
INPUT
DISPLAY ON SCREEN
SIGNAL
1080i
480p (16:9) Default to 16:9
Default to FULL mode.
480p (4:3) Note: Will stretch picture
480i Default to JUST mode
The ASPECT button on the remote control lets you choose
one of four display modes, depending on the formats of the
received signal and your preferences.
ASPECT
Input Signal
16:9 Screen Size
480i or 480p
4:3
ASPECT
Input Signal
16:9 Screen Size
480i or 480p
ZOOM
Note: If menu is displayed while in Zoom mode, the aspect
will change to Full to display complete menu.
ASPECT
Input Signal
480i or 480p
FULL
ASPECT
Input Signal
480i
JUST
E C
QUIPMENT ONNECTIONS
SAP MONO
ASPECT BUTTON
OPTIONS
16:9 only No options
4:3, Full or Zoom (see
below)
4:3, Full or Zoom (see
below)
horizontally.
4:3, Full, Just or
Zoom (see below)
This will display a 4:3 picture
at its standard 4:3 size with
Image on
gray side bars.
recommended
4
4:3 pictures as it may create
a permanent
3
screen if displayed for a
prolonged period of time.)
This will expand the 4:3
picture uniformly (width and
Image on
height) to full screen width
and then reposition the
16
picture vertically.
9
(Recommended for letterbox
pictures.)
This will show picture at full
Image on
16:9 Screen Size
screen size. (Recommended
for anamorphic pictures.)
16
9
This will stretch the right and
left edges of a 4:3 picture to
Image on
fill the screen, The center of
16:9 Screen Size
the screen will have aspect
16
correction applied. The size
9
of the picture will depend on
the original signal.
(Recommended for regular
TV viewing.)
(Not
for viewing
image on
9