First Time Setup - Panasonic TH-42PD25U/P Operating Instructions Manual

First Time Setup

For your convenience, First Time Setup menu will be displayed on screen when the set is turned on for the first time. If
needed, follow the menus and procedures displayed on-screen for setting up the features.
You can also make the settings in Setup menu (see pages 36, 37).
POWER
TV VCR DVD
DBS RCVR CBL
TV/VIDEO A -ANTENNA - B
CH
VOL OK VOL
MENU CH
1 2
Auto Scan
This feature allows you to selectively auto scan channels.
You can scan All, Analog only channels or Analog & Digital channels.
1
Press to select Auto Scan.
CH
Press to enter the sub-menu field.
VOL OK VOL
CH
Press to select the sub-menu.
2
CH
Press to start Auto Scan.
After Auto Scan is completed, the TV tunes to the first channel found during Auto Scan.
VOL OK VOL
CH
To return to the previous menu
MENU
Press .
To exit the menu screen
EXIT
Press .
Notes:
• If the EXIT button is pressed at anytime during Auto Scan, Auto Scan will be cancelled and the TV will return to the First
Time Setup menu.
• If a CableCARD is present during the First Time Setup and Antenna (A) is set to cable, Antenna (A) will not be scanned
due to the CableCARD providing the channel map.
22
Input Setup
Select the configuration of RF input depending on the signal source.
SAP
LIGHT
AUX
1
EXIT 2
3
Press to select Input Setup.
CH
Press to select Cable only, Cable/Antenna or
Antenna only.
VOL OK VOL
Press to enter your selection.
CH
Press to start the Auto Scan.
All available channels with a signal will be
CH
programmed into memory.
VOL OK VOL
CH
First Time Setup
Input Setup Setting Cable/Antenna
Auto Scan
First Time Setup
Input Setup Scan All
Antenna (A) Analog
Auto Scan
Antenna (A) Analog & Digital
Antenna (B) Analog
Antenna (B) Analog & Digital