Sony HMZ-T1 Reference Manual page 13

Replacing Consumables
The following replacement parts are
available.
• Ear pad (EP-G1)
• Ear cushion
• Nose pad
• Forehead supporter (Type A (thin),
Type B (medium) or Type C (thick))
• Forehead supporter cover
• Headband strap clip
• Light blocker (1 each for the left and right)
• Connecting cord holder
When these consumables break or show
signs of wear, consult your nearest Sony
dealer or Sony service centre.
You can replace the ear pads, the ear
cushions, and the nose pad as shown below.
Removing ear pads, replacing ear
cushions
Pull the ear pad toward the edge, away from the
headphone. Be careful not to pull too forcefully,
which may tear the ear pad.
Slit
Remove the ear cushion.
Ear cushion
Peel the new ear cushions away from the adhesive
backing. When attaching them, align the slit with
the ear cushion's opening. After replacing the ear
cushions, reattach the ear pads.
Replacing the nose pad
Pull off the nose pad to remove it. To attach a new
nose pad, push the nose pad clip into the opening.
Adhesive backing
GB
13