Troubleshooting - Sony RMN-U1 Instruction & Operation Manual




Troubleshooting

After starting this application, an error message appears.
Confirm that the Wi-Fi icon is displayed in the status bar. Make sure the Wi-Fi

setting of this unit is on. For details, refer to the operating manual of this unit.
This unit cannot connect to your home network.
See "After starting this application, an error message appears. "

Make sure the wireless network settings are correct. For details, refer to the

Operating Instructions of your device. Also refer to
http://www.sony.net/audio/netsettings
Devices are not displayed on the source selection screen or the player selection
screen.
Check the connection of the power cable, the network, and the source/(network

controlled) player unit.
Check the access permission settings. Also refer to the operating manual of the

source/(network controlled) player unit and see
http://www.sony.net/audio/netsettings
Content list is not displayed.
See "Devices are not displayed on the source selection screen or the player selection

screen. "
Turn on Remote UI mode to individually display music content on iPod/iPhone

mounted to NAS-SV10i/SV20i/SV20Di.
There is no sound after a playback operation.
The content may be not supported by the device. Also refer to

http://www.sony.net/audio/netsettings
Make sure the speaker button is activated.

Check the volume settings.
