Page 1
Washer dryer WVG30441EU en Instruction Manual and Installation Instructions...
Page 2
Your new washer dryer Display rules : Warning! You have chosen a Bosch washer dryer. This combination of symbol and signal Please take a few minutes to read and word indicates a possibly dangerous become familiar with the advantages of situation.
Intended use Customer service ... 35 Intended use Technical specifications ..35 For private domestic use only. ■ I n t e n d e d u s e The washer dryer is suitable for ■...
Safety instructions Warning Safety instructions Risk of scalding! When washing at high Electrical safety ■ temperatures, you may be S a f e t y i n s t r u c t i o n s Warning scalded if you touch the hot Danger of death! washing water (e.g.
Protection of the environment Cut through the mains cable Protection of the ■ and remove it, along with environment plug. Destroy the lock on the ■ Packaging/old appliance washer dryer door. P r o t e c t i o n o f t h e e n v i r o n m e n t Warning Risk of choking! Dispose of packaging in an...
The main points in brief The main points in brief T h e m a i n p o i n t s i n b r i e f Plug into the mains. Open the washer Select the washing/ Max.
Getting to know your appliance Getting to know your appliance Washer dryer G e t t i n g t o k n o w y o u r a p p l i a n c e 9S Open the door Detergent drawer 9T Close the door Operating/display panel...
Getting to know your appliance Control panel Change the default settings for the 8 Display panel for information. selected programme and select ~ Page 10 additional functions: @ Start programme. Select the button to start, Start/Reload ( Select a programme. Can be interrupt (e.g.
Getting to know your appliance Display panel Displays for the programme ( Temperature for washing Ž (cold) – 90°C Temperature in °C programme 0 Programme information 1:50* Programme duration after programme selection in h:min (hours:minutes) Finish in time in h (h=hour) 1 –...
Page 11
Getting to know your appliance @ Programme information and E lights up On if childproof lock has been activated ~ Page 17 additional function symbols E flashes The childproof lock is actived, and if the pro- gramme selector has been adjusted or the buttons have been pressed Õ...
Laundry An especially gentle washing Laundry process is required; e.g. Delicates/Silk programme P reparing laundry for washing Suitable for washing by hand; L a u n d r y e.g. W Wool program Sorting laundry according to: Do not machine wash. Ž...
Laundry Ensure that underwired bras are Do not iron laundry immediately after ■ ■ machine-washable. drying. It is recommended to roll the Wash delicates in a net or bag laundry up first to distribute residual ■ (tights, underwired bras, etc). moisture evenly.
Operating the appliance Selecting the programme/ Operating the Switching on the appliance appliance Note: Preparing the washer dryer If you have activated the childproof lock, O p e r a t i n g t h e a p p l i a n c e you must deactivate it before you can The washer dryer was tested before set a programme.
Operating the appliance The buttons are sensitive, they only settings for the drying programme if ■ need to be touched gently. If the required. button °C Temp., 0 rpm, Overview of programmes~ Page 20 ñ Finished in is held down, the Changing the default settings for setting options are automatically a drying programme:...
Operating the appliance Ensure that no laundry items are Filling the dispensers trapped between the door and Pull out the detergent drawer. rubber seal. Warning Eye / skin irritation! If the detergent drawer is opened while the appliance is running, detergent/care product may run out.
Operating the appliance Childproof lock Measuring aid* for liquid detergent *depending on the model You can secure the washer dryer to prevent the set functions from being Position the measuring aid for changed inadvertently. To do this, measuring the correct amount of liquid activate the childproof lock when the detergent: programme has started.
Operating the appliance Reloading the laundry Interrupting or ending the programme When the programme has started, the laundry can be reloaded or taken out as For programmes at high temperature: required. Select Start/Reload Touch the Start/Reload button. The To cool down laundry: Select Rinse washer dryer checks whether reloading is possible.
Operating the appliance If Hot flashes in the display before ■ the drying programme ends, the temperature in the drum is high. The programme for cooling the drum runs until the temperature in the drum has dropped. Wrinkle guard process starts after ■...
Overview of programmes Overview of programmes Programme on the programme O v e r v i e w o f p r o g r a m m e s selector Programme/Type of laundry Options/Information Name of the programme maximum load according to EN50229 Brief explanation of the programme and which textiles it is suitable for.
Page 21
Overview of programmes Programme/Type of laundry Options/Information Allergy Plus ; max. 6.5(5)* kg/4 kg Hardwearing textiles made of cotton or linen. Ž (cold) – 60 °C Notes – – – –, 400 – 1500 rpm Especially suitable for increased hygienic demands or particu- ■...
Page 22
Overview of programmes Programme/Type of laundry Options/Information max. 2 kg Wool ã Hand and machine-washable fabrics made of wool or wool blend; Ž (cold) – 40 °C particularly gentle wash programme to prevent shrinkage of laun- – – – –, 0 – 800 rpm dry, with longer programme breaks (soaking garments in the deter- –...
Changing programme default settings Starching Changing programme default settings The laundry should not be Note: treated with fabric softener. You can change the default settings for Liquid starch can be used in all wash C h a n g i n g p r o g r a m m e d e f a u l t s e t t i n g s selected programmes.
Changing programme default settings ñ Finished in Notes Programme selection in Intensive ■ 8 Define the Finish in time (end Dry 5 or Gentle Dry ‰ position to of programme). select an individual drying programme. Overview of The respective programme Note: programmes ~ Page 20 duration is displayed by selecting...
Selecting additional functions Selecting additional functions You can select your desired additional S e l e c t i n g a d d i t i o n a l f u n c t i o n s functions by touching the respective buttons.
Setting the signal Setting the signal S e t t i n g t h e s i g n a l Setting signal volume Activate setting mode for signal volume Turn to Off 1 step clockwise Press Start/ 1 step clockwise Release Reload and hold and...
Cleaning and maintenance follow the instructions of the descaling Cleaning and agent manufacturer. Suitable descalers can be purchased on our website or maintenance from customer service. ~ Page 35 Warning C l e a n i n g a n d m a i n t e n a n c e Cleaning the detergent Risk of electric shock! dispenser...
Cleaning and maintenance Open and remove the service flap. To prevent unused detergent Note: from flowing into the outlet during the next wash: Pour 1 litre of water into dispenser II and start the Spin/Empty 0/[programme: (if only a drained cycle is required: set rpm (spin speed) to 0 ).
Cleaning and maintenance Filter in the water inlet hose blocked Warning Danger of death! Do not immerse the Aqua-Stop safety device in water (it contains an electric valve). First, reduce the water pressure in the supply hose: Turn off the tap. Select any programme (except Spin/Empty 0/[).
Faults and what to do about them Wait until the drum has stopped turning. Faults and what to do Caution! about them Water damage Any escaping water may cause water Emergency release, e.g. if a damage. F a u l t s a n d w h a t t o d o a b o u t t h e m power failure occurs Do not open the washer dryer door if water can be seen through the glass.
Faults and what to do about them Information Cause/Remedy E:18 Drain pump blocked; clean the drain pump. Clean the drainage hose on the siphon. E:32 Alternating display with End when programme is finished: unbalance problem, spinning phase is aborted. Alternating display with End when programme is finished: no water detected in E:95 drying phase, may get bad drying result.
Page 33
Faults and what to do about them Faults Cause/Remedy Compartment M is not Remove the insert. Clean the detergent drawer and reinsert it. rinsed out completely. Odour formation in the Run the Drum Clean Û 90°C programme without laundry and detergent. ■...
Page 34
Faults and what to do about them Faults Cause/Remedy The drying result is not Excessively high ambient temperature (above 30 °C) or inadequate venti- ■ satisfactory (laundry is lation in the room in which the washer dryer is situated. not dry enough). The laundry has not been spun well enough before drying.
Customer service Customer service Technical specifications If you cannot correct the fault yourself, C u s t o m e r s e r v i c e see section, Faults and what to do Dimensions: about them ~ Page 32 T e c h n i c a l s p e c i f i c a t i o n s 850 x 600 x 590 mm Please contact our customer service.
Consumption values Consumption values C o n s u m p t i o n v a l u e s Programme Option Load Energy Water Programme (kg) consumption *** Consumption *** duration *** (kWh) (liter) (hours) Cottons i 20 °C* 0,30 Cottons i 40 °C* 1,06...
Positioning and connecting @ Water drain hose Positioning and H Elbow for securing the water connecting drain hose* P Water supply hose on standard/ Aqua-Secure models Included with the appliance P o s i t i o n i n g a n d c o n n e c t i n g depending on the model Check the machine for transport Note:...
Positioning and connecting under high water pressure. To prevent Installing the appliance in a leaks and water damage, you must kitchenette follow the instructions in this section. Warning Notes Danger of death! In addition to the safety information ■ There is a risk of electric shock if you listed here, the local water and touch live components.
Positioning and connecting Hose and cable lengths Connection on left side Unscrew and remove all four transport brace screws. Remove the sleeves. To do this, remove the mains cable from the holders. Connection on right side Insert the covers. Lock the covers firmly in place by applying pressure to the snap-in hooks.
Positioning and connecting Water inlet Connection Connect the water supply hose to the Warning tap (26.4 mm = ¾") and to the Danger of death! appliance (not necessary for Aqua-Stop There is a risk of electric shock if you models as this is permanently installed): touch live components.
Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin).
Positioning and connecting Alignment Electrical connection Loosen the lock nut in a clockwise Electrical safety direction with a wrench. Check the alignment of the washer Warning dryer with a spirit level and, if Risk of electric shock! required, correct. Adjust the height Danger of death if live parts are by rotating the appliance foot.
Positioning and connecting Before washing/drying for the Transportation first time Preparatory work Turn off the tap. The washer dryer was inspected Release the water pressure in the thoroughly before leaving the factory. To supply hose. remove any residual test water, run the Filter in the water inlet hose blocked Drum Clean Û...
Page 44
The tap only needs to be turned off if you are away from home for a long period, e.g. for several weeks' holiday. Robert Bosch Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY...