Fujitsu UTZ-KXRA Installation Manual page 2

5
After fi xing the indoor unit, attach the Ins hook to the hook (4 places).
6
Remove the insulation (3 places) on the indoor unit.
After the PCB box and cable tie with clip is installed, replace the insulation (2 places) over the PCB box.
*For detailed information on installation, refer to the installation manual of the External input and output PCB box.
When installing the External input and output PCB box (option).
Insulation
PCB box
Hook
Insert
Ins hook × 4
Bend
Push
Push
4 Places
Cable tie with clip
Insulation (Accessory of the PCB box)