GE HygroTrace User Manual page 36

Update (cont.)
Parameter Storage
Dump
This function transmits the contents of the EEPROM used for
calibration and parameter storage via the RS485 digital link. It is
provided to assist GE Sensing service personnel in maintaining
the product.
HygroTrace Moisture Transmitter
Select YES or NO and press Enter, or
press Cancel. If you select NO or
press Cancel, the unit returns to the
previous screen. If you select YES,
the following screen appears.
+
The HygroTrace software is
updated and the unit reboots (returns
to power up, proceeds through
several initiation displays and
returns to normal operation).
To dump the parameter storage,
select Dump, press Enter and the
following message appears at the top
of the screen for a few seconds.
+
When the dump is complete, Param
Storage reappears.
September 2007
31