Huawei NetCol5000-C065 Quick Manual page 11

(Optional) Connecting the Monitoring Network Cable
5.5
The smart cooling product supports both RS485 monitoring and FE monitoring.
Connecting the FE monitoring cable (SNMP/Modbus-TCP protocol)
The FE monitoring and FE teamwork use the same network cable. Connect the FE monitoring
cable in the same process of connecting the FE teamwork network cable.
RS485 Monitoring Network Cable (Modbus-RTU Protocol)
1. Make the COM network cable by referring to the following figure.
2. Group smart cooling products for monitoring based on performance requirements and
connect the monitoring network cables.
• If there is no teamwork control, connect the COM_IN port on each smart cooling product to
the customer's monitoring system.
In CAN networking, connect the COM_IN port on the first smart cooling product in each
•
monitoring group to the monitoring device.
11