Philips 43PUS7505/12 Service Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. TV
  5. 43PUS7505/12
  6. Service manual

Philips 43PUS7505/12 Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Chassis name
TPN20.6E LA
Published by Doris.zheng /SC 2037 Quality
2020
TP Vision Netherlands B.V.
©
All rights reserved. Specifications are subject to change without notice. Trademarks are the
property of Koninklijke Philips Electronics N.V. or their respective owners.
TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust
earlier supplies accordingly.
PHILIPS and the PHILIPS' Shield Emblem are used under license from Koninklijke Philips Electronics N.V.
Platform
43PUS7505/12
43PUS7505/60
43PUS7505/62
43PUS7555/12
NT72671
50PUS7505/12
50PUS7505/60
50PUS7505/62
58PUS7605/60
Subject to modification
TPN20.6E
Model name
50PUS7555/12
58PUS7505/12
58PUS7505/60
58PUS7555/12
70PUS7505/12
70PUS7555/12
50PUS7605/60
70PUS7605/60
LA
3122 785 21061
2020-Sep-11

Advertisement

Table of Contents
loading

Related Manuals for Philips 43PUS7505/12

Summary of Contents for Philips 43PUS7505/12

  • Page 1 Koninklijke Philips Electronics N.V. or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.

  • Page 2: Table Of Contents

    Koninklijke Philips Electronics N.V. or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.

  • Page 3: Product Information

    • 3840 x 2160p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz detailed product information, please visit www.philips.com/support HDMI - UHD  (Home) > Settings > General settings > Input sources > HDMI (port) > HDMI Ultra HD Display Type This TV can display Ultra HD signals. Some devices -...
  • Page 4 v9.2), WMA-PRO (v9 and v10) Satellite tuner • Antenna (75 ohm) Subtitles : • HDMI 1 in - ARC - Ultra HD - HDR – Formats : SRT, SMI, SSA,SUB, ASS,TXT • HDMI 2 in - ARC - Ultra HD - HDR –...

  • Page 5: Precautions, Notes, And Abbreviation List

    Refer to the diversity tables for the correct values. two pins of the Mains/AC Power plug. • The correct component values are listed on the Philips • Check the cabinet for defects, to prevent touching of any Spare Parts Web Portal.
  • Page 6 To avoid wear-out of tips, switch “off” unused equipment or reduce heat. • Mix of lead-free soldering tin/parts with leaded soldering tin/parts is possible but PHILIPS recommends strongly to avoid mixed regimes. If this cannot be avoided, carefully clear the solder-joint from old tin and re-solder with new tin.
  • Page 7 possible dangerous impact, others of quite high potential Board-Level Repair are of limited current and are sometimes held in less BTSC Broadcast Television Standard regard. Committee. Multiplex FM stereo sound • Always respect voltages. While some may not be system, originating from the USA and dangerous in themselves, they can cause unexpected used e.g.
  • Page 8 G-TXT Green TeleteXT distance is 6.5 MHz. L' is Band I, L is all H_sync to the module bands except for Band I High Definition LG.Philips LCD (supplier) Hard Disk Drive Loudspeaker HDCP High-bandwidth Digital Content Protection: LVDS Low Voltage Differential Signalling A “key”...
  • Page 9 Serial Peripheral Interface bus; a 4-wire module, implementing the CA system for a synchronous serial data link standard host (e.g. a TV-set) S/PDIF Sony Philips Digital InterFace Power On Reset, signal to reset the uP SRAM Static RAM PSDL Power Supply for Direct view LED...
  • Page 10 Software 640 × 480 (4:3) SWAN Spatial temporal Weighted Averaging Variable Level out: processed audio Noise reduction output toward external amplifier SXGA 1280 × 1024 Vestigial Side Band; modulation method Thin Film Transistor WYSIWYR What You See Is What You Record: record Total Harmonic Distortion selection that follows main picture and TMDS...

  • Page 11: Mechanical Instructions

    3. Mechanical Instructions 3.1 Cable Dressing CN701 ECN701 MAIN POWER MAIN POWER SUPPLY SUPPLY (1054) CN401 CN601 CN415 ECN408 Cable dressing (43" 75x5 series) ECN701 CN701 MAIN POWER SUPPLY SSB (1053) (1054) CN401 CN601 CN415 ECN408 Cable dressing (50" 75x5 series)

  • Page 12: Cable Dressing (58" 75X5 Series)

    CN701 ECN701 CN408 SSB (1053) MAIN POWER SUPPLY CN401 (1054) CN601 CN415 ECN408 Cable dressing (58" 75x5/7605 series) ECN601 ECN401 Key BOARD (1057) LOUDSPEAKER LOUDSPEAKER WIFI MODULE (1184) (1184) ECN401 ECN415 (Wifi02) IR/LED BOARD (1056) ECN601 Back cover overview (43"/50"/58" 75x5 series)

  • Page 13: Cable Dressing (50"/58" 7605 Series)

    CN701 ECN701 MAIN POWER SUPPLY SSB (1053) CN401 (1054) CN601 CN415 ECN408 Cable dressing (50" 7605 series) ECN601 ECN415 WIFI MODULE LOUDSPEAKER ECN601 (Wifi02) LOUDSPEAKER (1184) (1184) IR/LED BOARD (1056) ECN401 Back cover overview (50"/58" 7605 series)

  • Page 14: Cable Dressing (70" 75X5 Series)

    CN701 ECN701 CN408 CN401 SSB (1053) MAIN POWER SUPPLY CN601 (1054) CN415 ECN408 Cable dressing (70" 75x5 series) ECN601 ECN401 LOUDSPEAKER LOUDSPEAKER ECN415 WIFI MODULE ECN601 (Wifi02) (1184) (1184) IR/LED BOARD (1056) Back cover overview (70" 75x5 series)

  • Page 15: Cable Dressing (70" 7605 Series)

    ECN701 CN701 CN408 SSB (1053) MAIN POWER SUPPLY CN401 (1054) CN601 CN415 ECN408 Cable dressing (70" 7605 series) ECN601 LOUDSPEAKER ECN401 LOUDSPEAKER (1184) (1184) WIFI MODULE IR/LED BOARD (Wifi02) ECN601 (1056) ECN415 Back cover overview (70" 7605 series) 3.2 Assembly/Panel Removal 3.2.1 IR board Control Unit 1.
  • Page 16 (43"50" 6504 series) 3.2.2 Stand removal 1. Remove the fixation screws [1] that secure the stand. 2. Take the stand bracket out from the set. 3.2.3 Rear Cover Warning: Disconnect the mains power cord before removing the rear cover. 1. Remove all fixation screws [1] and [2] that secure the Back cover assy. 2.
  • Page 17 3.2.4 Keyboard Control Unit 1. Release the connector from the SSB Board. Caution: be careful, the Keyboard is catch on the Back cover, please be careful to avoid damage the fragile connectors! 2. Remove all the fixation screws from the keyboard control panel [2] and take it out from the Back cover. When defective, replace the whole unit.
  • Page 18 3. Remove all the fixation screws from the SSB [3]. 4. The SSB can now be shifted from side connector cover, then lifted and taken out of the I/O bracket. 3.2.6 Power Supply Unit (PSU) Caution: it is mandatory to remount all different screws at their original position during re-assembly. Failure to do so may result in damaging the PSU. 1.

  • Page 19: Service Modes

    4. Service Modes 4.1 Service Modes The Service Mode feature is split into following parts: Service Alignment Mode (SAM).  Factory Mode.  Customer Service Mode (CSM).SAM and the Factory mode offer features, which can be used by the Service engineer to repair/align a TV set. ...
  • Page 20 – (De) activate the selected menu item. – (De) activate the selected sub menu. – Change the value of the selected menu item. When you press the MENU button once while in top level SAM, the set will switch to the normal user menu (with the SAM mode still active in ...
  • Page 21 Remark: Under main menu “NVM editor”, you can use the UP/DOWN keys to view and change the set Type number, the set Production Number or the 18AC of a part.(The NVM-editor still has the same function as before, alpha-numeric entry.) 4.3 Factory mode: Purpose To perform extended alignments.
  • Page 22 4.4 Customer Service Mode (CSM) Purpose The Customer Service Mode shows error codes and information on the TVs operation settings.The call centre can instruct the customer (by telephone) to enter CSM in order to identify the status of the set.This helps the call centre to diagnose problems and failures in the TV set before making a service call.

  • Page 23: Software Upgrading, Error Code And Set Option Code

    5. Software Upgrading, Error code and Panel Code 5.1 Software Upgrading 5.1.1. The following update is for .pkg file. 1. Rename the file to “upgrade_loader.pkg”. 2. Prepare a USB memory (File format: FLAT, Size: 1G~8G). 3. Copy the software to USB flash disk (root directory). 4.
  • Page 24 Step 2: F/W Upgrade 1. Press [Settings], then Choose [Search for update] in the Settings menu 2. Choose [USB], then press OK. 3. Choose [Identify], then press OK. 4. .Select the file that you downloaded and press OK 5. Identify the software and choose [Done], then choose [Start] on following step...
  • Page 25 6.Choos [Upadte] press OK start the softwear update. 6. Upgrade in progress Step 3: Check the SW version After burning software, TV will restart Press “123654”, enter Customer Service Mode to check if the software version is correct.
  • Page 26 Caution: Please make sure that software upgrade is finished before unplug the USB and AC power! 5.2 Error Code 5.2.1 Introduction Error codes are required to indicate failures in the TV set. In principle a unique error code is available for every: •...
  • Page 27 5.2.4 How to Clear the Error Buffer The error code buffer is cleared in the following cases: • By using the CLEAR command in the SAM menu • By using the CLEAR command in the Factory mode: • By using the following key sequence on the remote control transmitter: “062599” directly followed by the OK button. •...
  • Page 28 ID CTN_ALT Option Panel Type Panel Type BOM# BOM# Code Code 43PUS7505/12 TPT430H3-QUBH10.K SA9P0R 50PUS7555/12 TPT500-PV5D.Q S01E 43PUS7505/12 TPT430H3-QUBH10.K SA9P0A 50PUS7605/60 TPT500B5-U2T01.D S01BK 43PUS7505/12 TPT430B5-GT013.H S1A 58PUS7505/12 TPT580F2-PV5D.Q S01B 43PUS7505/60 TPT430H3-QUBH10.K SA9P0A 58PUS7505/12 TPT580B5-U1T01.D S01M 43PUS7505/62 TPT430H3-QUBH10.K SA9P0J 58PUS7505/60 TPT580B5-U1T01.D S01M...

  • Page 29: Trouble Shooting

    Trouble shooting 2016年12月10日 2016/4/8 Picture-related Intermittent Ask Photo Picture ? problem ? Menu Smarkt Signal SW latest ? Backlight? issue function? issue SSB+LVDS+Panel Update SW LED working ? PSU/SSB Problem solved ? Sound ? PSU+ Panel Finish SW+SSB...
  • Page 30 Trouble shooting 2016年12月10日 2016/4/8 Audio/Sound- related Intermittent Sound ? problem ? Setting SW latest ? Mute ? issue issue Update SW Extra device Check extra connect? device Problem solved ? Factory setting Finish Sound back ? Setting issue SSB+SPK...
  • Page 31 6.Slow response to user interaction 7.Switches ON by itself 8.Switches Off by itself 9.Stuck in standby mode / unable to start up 10.Stuck on PHILIPS / ANDROID logo 11.CAM not recognized by TV 12.CAM authentication issue 13.Misc CAM issue 14.IP-EPG issues 15.BC-EPG issues...

  • Page 32: Electrical Diagram

    7.Electrical Diagram Block diagram 7.2 Power Supply Power architecture of this platform. AUDIO LVDS Platform power Display power CN8601 ON/OFF CN9102 for OLED Platform PS_ON MT5599 12V_A CN1190 AC-input + Main filter AC IN...
  • Page 33 7.3 Power tree 7.4 Power layout SSB R7020, STBC3V3 R4331, Panel_12V U7002, STBC5V ZD4301 +3V3-STANDBY R1708,+5V_SW C1728,+3.3V_TUNER C1605, wifi VCC+3.3V Power SSB Top View...
  • Page 34 Power SSB Bottom View...

  • Page 35: Ic Data Sheet

    8. IC Data Sheets 8.1 NT72671DTBG (IC U401--Scaler)
  • Page 37 8.2 TAS5806MDDCPR (IC U6001--Audio)

  • Page 38: Circuit Diagrams

    9.Circuit Diagrams 9.1 A 715GA052 PSU(For 43”/50” /58” 75x5 & 58” 7605 Series) 9-1-1 AC Input F9902 T 5 A H / 2 5 0 V 5A 250V FB9901 D9901 BEAD NR9902 SG9901 PG4007 Spark Gap 500V F9901 T 5 A L / 2 5 0 V NC / 5A 250V BD9901 C9913...
  • Page 39 9-1-2 PFC with LD7592GS L9802 C9801 NC / 240uH 47pF FB9802 E Q 3 2 BEAD D9801 Vsin FB9801 L9801 FB9805 FMNS-1106S 127R 240uH BEAD Q9801 R9804 IPA60R400CE C9804 1.5M 1% 1UF 450V R9803 R9802 D9804 C9817 C9805 NC / 2200PF2KV Rsen- 22pF 2KV ( P I N...
  • Page 40 9-1-3 Main Power HS9123 36 KOHM +-1% 1/8W R9103 HEAT SI NK R9100 F o r D 9 1 2 3 R9101 3M 1% 3M 1% R9191 +Vboost H O T C O L D C9102 2.2NF 10% 50V D9123 R9192 2 4 V / 3 .
  • Page 41 9-1-4 LED L8602 L B : 2 . 1 2 FB8601 BEAD +VLED L8601 FB8602 15uH BEAD C8603 C8604 +Vboost R8601 R8603 75 KOHM +-1% 1/8W HS8601 10 OHM 5% 1/8W R8602 10K OHM D8602 R8604 R8606 SS1060FL 5.6R 5% 10K OHM 5% 1/8W +12V D8603...

  • Page 42: 715Ga025 Psu

    9.2 A 715GA025 PSU (For 70” 7505/7605 Series) 9-2-1 AC Input HS9901 F9902 T5.0AL/250V TH9901 TH9906 127R F9901 FB9902 Vsin- SG9901 5A 250V 500V C9911 T5.0AH/250V C9913 BD9901 22PF 250V CN9901 220PF 250V L9902 BD9903 L9901 0.25mH C9901 RV9901 L9905 470nF 275V C9902 620V...
  • Page 43 9-2-2 PFC with LD7592 HS9801 For Q9801 C9803 47pF 2KV Vbus FB9804 D9803 Vsin FMNS-1106S HEAT SINK BEAD FB9801 L9801 FB9802 FB9803 JUMPER BEAD BEAD C9804 R9820 1.5M 1% C9801 C9802 C9806 82uF 450V 82uF 450V 1UF 450V R9802 D9804 22OHM +-5% 1/8W Q9801 L9802...
  • Page 44 9-2-3 LLC with SSC3S927 R9103 68K 跋 蔼溃 C9918 C9919 Vbus R9101 R9100 C9111 3M 1% 3M 1% R9103 36K 1% R9102 C9100 COLD C9103 0R05 1/4W R9123 C9101 C9102 D9104 2.2NF 50V Q9101 1N4148W AOTF12N50 R9122 C9119 R9121 R9118 10R 1/8W 5% R9117 R9119...
  • Page 45 9-2-4 LLC SSC3S931 with PF7302 FB8601 Vbus BEAD R8620 HS8612 1M 1% 1/4W D8602 HS8601 FMNS-1106S R8601 T8601 POWER X'FMR 1M 1% 1/4W VLED_S VLED R8602 HEAT SINK 1M 1% 1/4W L8601 D8605 R8605 1N4148W Q8601 D8606 R8611 R8604 R8607 1M 1% 1/4W FMNS-1106S 10R 1/8W 5%...
  • Page 46 9-2-5 JUMPER J902 J903 J905 J907 J908 J909 J910 J912 J913 J914 J915 J916 J917 J918 J919 J920 JUMPER JUMPER JUMPER JUMPER JUMPER JUMPER JUMPER JUMPER JUMPER JUMPER JUMPER JUMPER JUMPER JUMPER JUMPER JUMPER J921 J922 J924 J925 J926 J927 J929 J930 J932...

  • Page 47: 715G9856 Psu

    9.3 A 715G9856 PSU (For 50” 7605 Series) 9-3-1 AC Input F9901 5A 250V T 5 A H / 2 5 0 V NR9901 F9902 SG9901 1.5R NC/FUSE DSPL-501N-A21F BD9901 TS10K80-01 CN9901 U9901 CN9903 NC/CAP200DG-TL NC/AC 2P AC 2P RSEN- Vsin C9903 C9904...
  • Page 48 PFC stage 9-3-2 C9802 100pF 2KV D9801 FMNS-1106S Vsin FB9804 FB9801 FB9803 127R BEAD 127R C9801 C9804 C9805 C9806 L9802 1UF 450V FB9802 2.2NF L9801 BEAD 47UF 450V 47UF 450V 300uH NC/240uH Rsen- R9801 Q9801 0R075 TK13A60D R9802 D9802 HS9801 R9803 47 OHM 1/4W 1N4148W...
  • Page 49 9-3-3 Main Power R9105 C9909 C9103 470pF 250V 1NF 2KV D9102 D9101 R9101 R9102 1N4148W PG4007 3M 1% 3M 1% R9106 Q9101 IPA50R800CE R9107 R9108 D9107 10 OHM 1% 1/8W 75 OHM 1% 1/8W FMET-22015 C9104 R9104 100pF 2KV H O T C O L D +Vboost NC/20M OHM...
  • Page 50 BL power 9-3-4 L8601 33uH HS8601 D8601 FB8601 FMET-22015 BEAD +VLED L 8 6 0 1 O p t i o n ( L 8 6 0 2 N C ) LV 33UH 373G0253258X00 L8602 HV 82UH 373G0253363H00 NC/80uH C8617 100pF 2KV HEAT SINK +Vboost...

  • Page 51: 715Ga546 Ssb

    9.4 B 715GA564M SSB 9-4-1 SOC-EMMC MAIN POWER BL_DIG_DIM STBC5V BKLTPWR A d d 2 0 1 9 / 2 / 2 6 STBC3V3 BKLTPWR POWER_ON MAIN3V3 MAIN3V3 BACKLIGHT_LEVEL BACKLIGHT_LEVEL CN701 BZT52-B22 DRAM_PWR_EN DRAM_PWR_EN STBC_PW_EN STBC_PW_EN BL_ON/POK ZD7002 R7002 POWER_ON POWER_ON 18,20 NC/BZT52-B22...
  • Page 52 9-4-2 SOC-DDR4-1-2 U p d a t e d 2 0 1 9 / 5 / 3 STBC3V3 U p d a t e d 2 0 1 9 / 5 / 3 MAIN1V8 VDD33_USB VDD33_HDMI VDD09_STBC VDD33_STBC VDD0V9_HDMI VDD0V9_CORE VDD15_DDR R4501 0R05 1/10W...
  • Page 53 9-4-3 SOC-DDR4-3-4 A d d 2 01 9 / 5 / 7 Updated to 0603 on 2019/3/8 MAIN1V8 +1V8-SOCKET STBC3V3 MAIN1V8 V_EMMC R4068 0R05 OHM STBC3V3 STBC3V3 STBC3V3 STBC3V3 S T B C R E S E T S T B C_ U A R T 1 PCB_VER R4003 eMMC3V3...
  • Page 54 9-4-4 DDR POWER VDD15_DDR DDRF_MCKE DDRM_CKE0 R716 1.2K R1664 U402 VDD15_DDR VDD15_DDR 1K 5% K4B4G1646E-BY MA 1K 1% VDD15_DDR DDRM_A0 R122 1K 1% DDRM_A1 DDRM_A2 R2417 R2418 100nF 16V DDRM_RSTn DRAM_RSTn DDRM_A3 NC/0R05 1/16W NC/1K 1% NC/1K 1% VREF_DQ DDRM_A4 VREF_A 1nF 50V VREF_CA...
  • Page 55 9-4-5 FE-TUNER-DEMOD U401B D D R 3 K G D R120 240R 1% AD15 Suspend_S/GPI_19 TP67 R158 240R 1% DDRF_RSTn DDRS_RSTn R761 R2382 AC14 DDRS_RSTn NC/0R05 1/16W SRST_DDR S_DDR_LDOOUT R760 RST_KGD DDRS_CKE0 10K 5% CKE_KGD VREF_3 VREF_KGD VDD15_DDR VDD15_KGD VDD15_KGD DDRF_SCKE DDRS_CKE0 R755...
  • Page 56 9-4-6 SOC-VB1-OUT ADIN_R0 ADIN_R0 CVBS_0 ADIN_L0 R1020 100R 5% C1004 47nF 10% 16V ADIN_L0 ZD1008 R1022 U p d a t e d 2 0 1 9 / 2 / 2 8 75R 1% C1017 33PF 50V CN133 U p d a t e d 2 0 1 9 / 8 / 6 HD_AV_L R1023...
  • Page 57 9-4-7 DCDC-SOC-VCCK-DVSS 1 s t A UD I O A M P T A S 5 8 6 0 ( D i gi t a l + H P) U p d a t e d 2 0 1 9 / 7 / 2 4 A M P _ P O W E R AMP_VDD AMP_VDD...
  • Page 58 9-4-8 DCDC-SYSTEM-POWER1 U401D MAIN3V3 LVA_0-/LANE0- C4301 100nF 16V VB1_RX_0N LVA_0-/LANE0- LVB_0-/LANE6- LVA_0+/LANE0+ VB1_RX_0P C4302 100nF 16V LVA_0-/LANE0- LVB_0-/LANE6- LVA_0+/LANE0+ LVB_0+/LANE6+ LVA_1-/LANE1- VB1_RX_1N C4303 100nF 16V LVA_0+/LANE0+ LVB_0+//LANE6+ LVA_1-/LANE1- LVB_1-/LANE7- LVA_1+/LANE1+ VB1_RX_1P U p d a t e d 2 0 1 9 / 3 / 2 C4304 100nF 16V LVA_1-/LANE1-...
  • Page 59 9-4-9 DCDC-SYSTEM-POWER2 ( B O T T O M ) A P o r t : H D M I & A R C ( B O T T O M ) B P o r t : H D M I ( S i d e ) C P o r t : H D M HDMIA5V HDMIB5V...
  • Page 60 9-4-10 DCDC-SYSTEM-POWER3 + 5 V _ S W T U N E R 3 . 3 V U p d a t e d f o o t p r i n t 2 0 1 9 / 9 / 1 0 MAIN3V3 +3V3_TUNER FB1701...
  • Page 61 9-4-11 AUDIO-1st-CLASS-D-AMP L N B W E R S U P P L Y L751 D752 MAIN12V DISEQC_TX DISEQC_TX LNB_EN 10uH SR24 LNB_EN C751 C752 C753 C754 C755 LNB_DROP 100nF 16V 10UF 16V 10uF 25V 10uF 25V 10uF 25V LNB_DROP 1318V_SW 1318V_SW TU_LNB_DET...
  • Page 62 9-4-12 AUDIO-2nd-CLASS-D-AMP MAIN3V3 U p d a t e d 2 0 1 9 / 2 / 2 7 CN159 PCMICA CARD CI_D3 CI_CD1 C L O S E C O N N E C T O R CD1# CI_D4 CH_DATA3 MAIN5V CI_D5...
  • Page 63 9-4-13 PCMCIA BT-IRQn_DET BT-IRQn_DET WIFI_PWR_EN C N 4 1 5 f o r u s e d ( W I - F I B T ) CN416 for EU used (only WI-FI) WIFI_PWR_EN U p d a t e d 2 0 1 9 / 2 / 2 7 USB_DP3 USB_DP3...
  • Page 64 9-4-14 HDMI-INPUTS DVS_ON DVS_ON PANELPWR PANELPWR USB PORT 1 BOTTOM F F M P P O W E R S W I T C H A d d 2 0 1 9 / 5 / 6 BKLTPWR STBC3V3 BKLTPWR U p d a t e d 2 0 1 9 / 9 / 1 1 STBC5V Back Facing...
  • Page 65 9-4-15 HDMI-SOC-ARC CP U S ide : CPU Side: Updated on 2019/2/27 T e s t M o d e B S 0 _ B y p a s s C P U M a s k R O M B S 0 = 0: programming using i2c STBC Side:...
  • Page 66 9-4-16 SCART-YPbPr-CVBS U p d a t e d 2 0 1 9 / 7 / 2 5 R1403 LED_PWM0 100R 5% STBC3V3 C1401 CN404 STBC3V3 ZD1401 ZD1402 100NF 16V U p d a t e d 2 0 1 9 / 7 / 2 4 CONN R1401 AMBI_TEMP...

  • Page 67: 715G8623 Ir/Led Panel

    9.5 E 715G8623 IR Board (For 43”/50” /58” 75x5 Series) 9-5-1 IR Light Sensor CN201 R223 R224 R225 R226 R227 R228 R229 I2C ADDR DVD3V3 LED_R DVD3V3 JSA-1130 0x44 RC-IR C222 1uF 10V JSA-1130 0x45 3V3SB LS_SCL R225 0R05 1/16W C221 100N 16V DVD3V3...

  • Page 68: 715Ga039 Ir/Led Panel

    9.6 E 715GA039 IR Board(For 70” 75x5/7605 & 50”/58” 7605 Series) 9-6-1 IR&STB LED&Light sensor L i g h t S e n s o r DVD3V3 U222 DVD3V3 R 2 2 3 R 2 2 4 R 2 2 5 R 2 2 6 R 2 2 7 R 2 2 8...

  • Page 69: 715G9740 Keyboard Control Panel

    9.7 E 715G9740 Keyboard control panel (For 43”50” 65x4 Series) 9-7-1 Key...

  • Page 70: Styling Sheet

    10. Styling Sheets 10.1 75x5 series 43"/50"/58" 1053 1050 0040 1184 1054 WIFI02 1057+0063 1056+0036 0030...

  • Page 71: 7605 Series 50/58

    10.2 7605 series 50"/58" 1050 1053 0030 1054 1184 1056 WIFI02 0040...

  • Page 72: 75X5 Series 70

    10.3 75x5 series 70" 1053 1050 0040 1184 WIFI02 1184 1056 1054 0030...

  • Page 73: 7605 Series 70

    10.4 7605 series 70" 1050 WIFI02 1053 1184 0030 1054 1054 1184 0040 1056 0067...

  • Page 74: Dismantling Procedure For Specific Handling Parts

    11. Dismantling procedure for specific handling parts As complete appliances, LCDs are deemed to be hazardous waste (e.g. 16 02 13*, 20 01 35*) in the EU according to the German Waste Catalogue Ordinance. These appliances may only be handled by authorized handling plants. LCDs must be stored in accordance with the requirements stipulated in Appendix VIII (1) or (2) of Directive 2012/12/EU and must, amongst other things, be stored in a weatherproof manner.
  • Page 75 These substances, mixtures and components shall be disposed of or recovered in compliance with Directive 2008/98/EC cathode ray tubes: the fluorescent coating has to be removed equipment containing gases that are ozone depleting or have a global warming potential (GWP) above 15, such as those contained in foams and refrigeration circuits: the gases must be properly extracted and properly treated.
  • Page 76 The diffusion panels can be accessed by lifting the inner casing, typically held in place with clips which can be removed with appropriate tools. The panel consists of several plastic sheets which can be processed. A final consideration is that of the back light which must be removed prior to processing.

This manual is also suitable for:

50pus7555/1243pus7505/6058pus7505/1243pus7505/6258pus7505/6043pus7555/12 ... Show all

Table of Contents