Samsung 4 Series Quick Setup Manual page 2

Step 5 :
Run Plug & Play
When you turn on your TV for the first time, it automatically launches the Plug &
Play function. With Plug & Play, you can select the On Screen Display language,
set the clock mode, and launch the TV's channel memorizing process. It also
displays connection instructions similar to those in this guide.
To navigate while Plug & Play is running, press the Up, Down, Left or Right
arrow buttons on your remote. To make a selection, press the
To skip a screen, press the MenU
To turn on your TV, press the POwer
POwer button on the TV. To run Plug & Play, follow these steps:
Select language of the OSD.
language
1. On the Language screen, select the language for the On Screen Display
(OSD) using your remote control, and then press
Home Use screen appears.
2. Select Home Use, and then press
Demo, the TV will reset your picture and audio settings every 30 minutes. After
you press enTerE button, the Antenna Source screen appears.
3. If your TV is only attached to an antenna, select Air. If your TV is only
attached to cable and you have no cable box, select Cable. If your TV is
attached to an antenna and cable with no box, select Auto. When done,
press enTerE button on your remote. The Select Cable System screen
appears.
IMPORTANT: If your TV is attached to a cable or satellite box, skip Steps
3 through 5. After Plug & Play is complete, set your TV to Channel 3 or 4,
according to the directions for your cable or satellite box.
4. If your TV is attached to a cable system and you have no cable box, you
must select your cable system type. If you have Digital cable, you must
select the cable system type for both Analog and Digital.
Remote Control Buttons and Functions:
Press number buttons for direct access to channels.
Press to select additional digital channels broadcast by
the same station. For example, to select channel 54-3,
press 54, press -, and then press 3.
Displays the channel list on the screen.
Quickly selects frequently used functions.
Use these buttons to select On Screen Menu items
Colored buttons for use in the
Use these buttons in the Media Play
( : Controls recording on Samsung recorders with the
All manuals and user guides at all-guides.com
enTerE
button.
button on the remote or press the
Plug & Play
english
español
: english
Français
U Move E enter
enTerE button. The
enTerE button. If you select Store
Turns the TV on and off.
Adjust the volume.
View the Media Play.
and change menu settings.
Return to the previous menu.
Channel List, Media Play
menu, etc.
and Anynet+ modes.
Anynet+ feature)
After you have selected the cable system type, select Start, and then
press the enTerE
Most cable systems are Standard
✎
about what kind of cable system you have, contact your cable company.
5. The TV memorizes the available channels. This process can take up
to 45 minutes. After the TV has memorized the channels, the Clock Mode
screen appears.
button.
6. Choose the Clock Mode. Select Auto if you have a digital channel in your
area. Select Manual if you don't, or if you have a cable or satellite box.
When done, press
If you select Manual, the clock setting screen appears.
✎
Select the daylight saving time setting: Off, On, or Auto, and then press
7.
button.
enTerE
After the time zone screen, The connection method for best HD screen quality
8.
is displayed. Press Right arrow button on your remote to view each screen in
succession. Press the
9. The enjoy your TV screen appears.and then press
Basic Functions
Selecting a Source
To watch a movie on your Blu-ray player or watch your favorite TV show, you must
select the correct source. A source is a device, such as a Blu-ray/DVD player, a
cable/satellite box, antenna or a cable TV input.
Sources can be connected to your TV through
the HDMI, DVI, Component, Composite, or D-sub
connections, or through the Antenna or Cable In
connections.
To view the signal from a source connected to the
HDMI, DVI, Component, Composite, or D-sub jack, press the
your remote. Each time you press the
source.
Press to switch between the sources (Blu-ray player,
cable box, DVD player, etc.) connected to your TV.
Return to the previous channel.
Cut off the sound temporarily.
Change channels.
Display the main on-screen menu.
MEDIA.P
Display Favorite Channel Lists on the screen.
Press to display information on the TV screen.
Exit the menu.
A B C D
S.MODE SLEEP MTS
S.MODe: Select the sound mode.
P.MODE P.SIZE CC
SleeP: Setting the Sleep Timer.
MTS: Press to choose stereo, mono or Separate
P.MODe: Select picture mode.
P.SIze: Choose the picture size.
CC: Controls the caption decoder.
button on your remote.
(STD) systems. If you are not sure
enTerE button. The Daylight Savings screen appears.
button to skip this section.
MenU
SOUrCe button, you change to a different
Audio Program (SAP broadcast).
enTerE button.
SOUrCe button on
MEDIA.P
A B C D