Toshiba BU505MCG Instruction Manual page 79

● Setting
- Select the type of Event notifications
Set the following value to "EventSelector" register. The setting value is Enumeration type.
FrameTrigger (*)
FrameTriggerError
FrameTriggerWait
FrameTransferStart
FrameTransferEnd
ExposureStart
ExposureEnd
Timer0Start
Timer0End
- Set the activation of Event notifications
Set the following value to "EventNotification" register. The setting value is Enumeration type.
● Note
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
setting value Event ID
0x8020
0x8021
0x8022
0x8030
0x8031
0x8040
0x8041
0x9000
0x9100
setting value
Off (*)
On
Timing of Event notification
Reception of Frame Start Trigger
Rejection of Frame Start Trigger
Start of waiting for Frame Start Trigger
Start of transferring streaming data
End of transferring streaming data
Start of Exposure
End of Exposure
Start of Timer0
End of Timer0
* initial factory setting
Event notification
Inactive
Active
* initial factory setting
78 / 92 D4253386C
http://www.toshiba-teli.co.jp/en/