Siemens 8DA10 Series Installation And Operating Instructions Manual page 108

Installation
108/214
The already assembled adapter plate can be displaced due to vibrations during transport.
To position the adapter plate correctly:
➭ Loosen the M8 bolts of the adapter plate a little bit.
➭ Bolt the adapter plate uniformly together with the voltage transformer mounting plate.
Tightening torque: 30 Nm.
➭ Insert the silicone adapter in the voltage transformer.
Revision 11 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • 861-9601.9
INFORMATION
①
②
M8 bolts for fixing the adapter
plate on the voltage transformer
mounting plate
Bushing for low-voltage plug
connector