LG ipsolute LW6354 Series Owner's Manual page 27

IP address allocated router.
> Web port: The default HTTP port number (80) can be changed
to any port within the range 1 025 to 65 535.
> RTSP port: Check RTSP port. The default port is 554. Other
ports can be selected within the range 1 025 to 65 535.
Note:
The RTSP port number should not be same with the web
port number.
ARP Ping
> Enable ARP Ping to configure IP address: Check to enable
ARP ping.
• Save: Click this button to confirm the settings.
RTP stream
RTP (Real-time Transport Protocol) is an internet protocol that allows
programs to manage the real-time transmission of multimedia data,
via unicast or multicast.
Profile
> RTP unicast: When enabled the transmission of the data to
Operation and settings
the specified equipment happens on a network specifying a
single address.
> RTP multicast: When enabled it reduces the transmission
load on the camera by making the computer of the same
segment network receive the same transmission data.
- IPv4 address: Set the IP address for RTP multicast.
- Base RTP port: Enter the port number of even number
used for the multicast streaming. Each profile uses
successive 6 port number which starts from [Base RTP
port]. It is initially set to 10 000 and you can edit this
between 10 000 and 65 530.
Note:
Each profile using multicast needs its own multicast IP address and
port numbers to avoid address conflict. When more than 2 profiles
use same multicast IP address, each [Base RTP port] number should
be distinguished from the other port number more than 6 at least.
Multicast
> Always Multicast: Check to enable multicast regardless of
client connection.
TTL
> TTL: This option indicates the Time-To-Live of multicast
packets. The default setting is 7, and the allowed TTL range is
from 1 to 255.
• Save: Click this button to confirm the settings.
27