Installing/ Removing The Optional Nicd Battery Pack - Kenwood TK-278G Instruction Manual

Installing/ Removing the Optional NiCd Battery Pack

Only use the KNB-14 and KNB-15A battery packs
with this transceiver.
DO NOT SHORT THE BATTERY TERMINALS OR DISPOSE
OF THE BATTERY BY FIRE.
NEVER ATTEMPT TO REMOVE THE CASING FROM THE
BATTERY PACK.
1 Match the four grooves
of the battery pack with
the corresponding
guides on the back of
the transceiver.
2 Slide the battery pack
along the back of the
transceiver until the
release latch on the
base of the transceiver
locks.
3 To remove the battery
pack, pull back on the
release latch and slide
the pack away from the
transceiver.
4