Table of Contents
Advertisement
APPENDIX
PROGRAMMING THE REMOTE CONTROL
The provided universal remote control can be programmed to operate most remote-controllable devices.
Note that the remote may not control all models of other brands.
Programming a code into a remote mode
Testing your remote control.
1
To find out whether your remote control can operate other components without programming, turn on a
component such as a STB and press the corresponding mode button (such as a
trol, while pointing at the component. Test the
responds correctly. If the component does not operate correctly, the remote control requires programming
to operate the device.
Switch on the component to be programmed, then press the corresponding mode button (such as
2
the remote control. The remote control button of the desired device is illumintated.
Press the
3
code.
Enter a code number using the number buttons on the remote control. Programming code numbers for the
4
corresponding component can be found on the following pages. If the code is correct, the device will turn
off.
5
Press the
6
Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.
116
MENU
and
MUTE
buttons simultaneously, the remote control is ready to be programmed with the
MENU
button to store the code.
POWER
and
C H
buttons to see if the component
S T
B) on the remote con-
S T
B) on
Hide quick links:
Advertisement
Table of Contents
