Advertisement
Available languages
Available languages
6 Adjusting the Image
To ensure the best image quality, follow the steps below to adjust the projected image.
Do not make adjustments with the Keystone function of the projector. Doing so may
result in a reduction in image quality.
When using the BrightLink 475Wi/480i/485Wi, follow these guidelines for setting up the projector:
•
Make sure the image is evenly rectangular, without distortion.
•
Make sure the projector is tilted no more than ±3° vertically and horizontally in relation to the projected
image.
•
If you must use the Keystone function, make sure the amount of vertical and horizontal keystone
correction is no more than ±6.
A
Turn on the projector
Using the Remote Control
BrightLink 475Wi/480i/485Wi
PowerLite 470/475W/480/485W
B
Display the mount adjustment test pattern, as described below
1.
Press the [Help] button.
Using the Remote Control
BrightLink 475Wi/480i/485Wi
PowerLite 470/475W/480/485W
2.
Press the [ ] button on the remote control, or the [Wide] button on the control panel.
The test pattern is displayed.
Using the Remote Control
Using the Remote Control
BrightLink Pro 1410Wi
Using the Remote Control
BrightLink Pro 1410Wi
Using the Control Panel
36
Using the Control Panel
Using the Control Panel
Advertisement
