Panasonic NP-6F2MUQNZ-NZ Service Manual page 12

Process of water inlet (indicated by magenta route)
In this process, regeneration water route is cut off, main water route is open. The water in the main water route is softened when
pass through the softener, and then enter in the tub. During this phase, some of inlet water will be stored in the air breaker to be
regenerating water.
Process of cycle washing (indicated by blue route)
Cycle washing action is driven by washing pump motor. Water can obtain the power during it passing through the working washing
pump, then be pumped into spray arm, pass from spray arm nozzles, over the dishes, into sump ,where connect to washing pump,
and to get in the next water cycle.
12