Restarting, Resetting And Repairing - Sony E5363 User Manual

Restarting, resetting and repairing

You can force your device to restart or shut down if it stops responding or won't
restart normally. No settings or personal data get deleted.
You can also reset your device to its original factory settings. This action is
sometimes necessary if your device stops functioning properly, but note that if you
want to keep any important data, you should first back up this data to a memory card
or other non-internal memory. For more information, see
content on page 40.
If your device fails to turn on or you want to reset your device's software, you can use
Xperia™ Companion to repair your device. For more information on using Xperia™
Xperia™ Companion on page 38.
Companion, see
If you are sharing a device with multiple users, you may need to log in as the owner, that is,
the primary user, to reset your device to its original factory settings.
To restart your device
Your device may fail to restart if the battery level is low. Connect your device to a charger and
try restarting again.
1
Press and hold down the power key
2 In the menu that opens, tap Restart. The device restarts automatically.
To force the device to restart or shut down
1
Press and hold down the power key
for 10 seconds.
2
Your device vibrates once. Depending on whether you wish to force the device
to restart or shut down, proceed as follows.
•
If you wish to force restart the device: Release the keys at this point. The
device restarts.
•
If you wish to force shut down the device: Continue pressing the keys. After
a few more seconds, the device vibrates three times and turns off.
To perform a factory data reset
Before you start, make sure to back up any important data that is saved on the internal
memory of your device to a memory card or other non-internal memory. Factory data reset will
erase all data from your device's internal storage, and you will not be able to access the files
on any of your encrypted SD cards again.
To avoid permanent damage to your device, do not restart your device while a reset procedure
is underway.
1
From your Home screen, tap
2
Find and tap Settings > Backup & reset > Factory data reset.
3
Tap Reset phone.
4
If required, draw your screen unlock pattern or enter your screen unlock
password or PIN to continue.
5
To confirm, tap Erase everything.
Your device does not revert to an earlier software version of Android™ when you perform a
factory data reset.
If you forget your screen unlock password, PIN or pattern, you can use the device repair
feature in Xperia™ Companion to erase the security layer. You need to provide your Google
account login details to perform this operation. By running the repair feature, you reinstall
software for your device and you may lose some personal data in the process.
Repairing the device software
If you forget your screen unlock password, PIN or pattern, you can use the device
repair feature in Xperia™ Companion to erase the security layer. You need to provide
your Google account login details to perform this operation. By running the repair
This is an internet version of this publication. © Print only for private use.
.
and the volume up key at the same time
.
135
Backing up and restoring