Before Operating Your Dryer
Read your dryer Owner's Guide. It has impor-
tant safety and warranty information. It also has
many suggestions for best drying results.
To reduce the risk of fire, electric
shock or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer Owner's
Guide before operating this appliance.
Operating Steps
Read "Drying Procedures" in your Owner's Guide.
It explains these operating steps in detail.
1. Prepare items for drying.
2. Check that lint screen is clean and in place.
3. Load the dryer. If desired, add a dryer fabric
softener sheet. Close the door.
4. Select the cycle and drying temperature for each
load. To change the temperature, turn the TEMP
knob to the desired temperature.
5. A suitable drying temperature, dryness level and
options will automatically be displayed for each
cycle. To change the temperature or dryness
level, press TEMP or DRYNESS until the de-
sired selection is made. To select an option,
press OPTIONS until the indicator for a desired
option flashes, then press SELECT.
DRYER OPERATING INSTRUCTIONS
Follow the same steps to delete an option. If a
temperature, dryness level or option is not avail-
able for a cycle, it will not light.
6. The changes you make will be remembered the
next time that cycle is selected. See the "Dryer
Settings Chart" for more details.
7. Press START to begin the cycle.
•
To pause the cycle or change settings,
press PAUSE/CANCEL once.To resume
the cycle, press START again.
•
To stop or change the cycle, press
PAUSE/CANCEL twice.
8. A signal will sound at the end of the cycle and
periodically during Press Saver when the Cycle
Signal option is selected. When the cycle ends,
remove items immediately and hang or fold.
9. Clean the lint screen after every load.
Cycle Selection
For best results, follow the fabric care label instruc-
tions on items to be dried.
Auto Dry
Applies to Towels, Bulky, Normal, Perm Press,
Sport and Delicate cycles. Auto Dry cycles take
the guesswork out of drying time. The load will au-
tomatically be dried at the selected temperature to
the desired dryness level. The dryer senses the
moisture level of the load as it tumbles through
heated air.
Auto Dry cycles save time and energy and protect
fabrics.When the load has reached the selected
dryness level, it will continue to tumble, unheated,
during a Cool Down period. This helps reduce wrin-
kling and makes items easier to handle during un-
loading.
Drying time varies depending on size and damp-
ness of load, weight and fabric type. Room tem-
perature and humidity, type of ventillation system,
electrical voltage or gas pressure can also affect
drying time.
Towels
Select this Auto Dry cycle for towel loads.
Normal
Select this Auto Dry cycle for cotton items.
Perm Press
Select this Auto Dry cycle for cottons and blends
with a no-iron finish.
Delicate
Select this Auto Dry cycle for knits and delicate
items.
Quick
Select this cycle to quickly dry a small load made
up of just a few items. It provides approximately 20
minutes of tumbling followed by a 10-minute cool
down period.
PN 134431300A (0501)