Local Storage; Wiring - Bosch use IP FLEXIDOME IP starlight 6000 VR Installation Manual

FLEXIDOME IP starlight
6000 VR
5.2

Local storage

Notice!
Local storage on memory cards should only be used for alarm
recording. To minimize the risk of losing information, use
multiple, redundant recording systems and a procedure to back
up all digital information.
To insert a memory card:
1.
2.
5.3

Wiring

Caution!
The unit has connection terminals on flying leads. In wet or
outdoor installations, use a field wiring box with NEMA Type 4X
!
or IP66 protection level or better. After connections are made,
ensure the watertight compartment is tightly closed and cables
and conduits are properly sealed to prevent water ingress.
Notice!
Use proper surge suppression on network/video/power/audio/
data/alarm cables that are routed outdoors, or close to large
inductive loads or electrical mains supply cables.
Bosch Security Systems
Slide the memory card into the slot.
Press it firmly until it latches into place in the slot (when
removing the card, press it down firmly again until it
unlatches).
Installation | en
2016.06 | v1.0 | AM18-Q0711
13