Cleaning The Oven Compartment With Self Clean  (Clean); Starting Self Clean - Miele 11 918 970 Operating Instructions Manual

36 inch all gas range (gas oven and gas cooktop)
Table of Contents

Advertisement

Cleaning and care of the oven
Cleaning the oven
compartment with Self
clean  (Clean)
Instead of cleaning the oven manually
you can use the Self clean  (Clean)
operating mode.
During the Self Clean function, the oven
compartment reaches temperatures in
excess of 750°F (400°C). Any grime that
has accumulated will be broken down
and burnt to ash as a result of the high
temperatures.
There are 3 Self Clean settings
available, each with a different duration:
- Level 1 for light soiling
- Level 2 for heavier soiling
- Level 3 for very heavy soiling
The oven door is automatically locked
when the Self Clean process starts. It
cannot be opened until after the
program has finished.
The timer can be used to delay the start
time of the Self Clean program.
At the end of the Self Clean program,
any residues such as ash from the
cleaning process, which are formed
depending on the oven compartment's
degree of soiling, can be easily wiped
away.
Preparing for Self Clean
Accessories will be damaged by the
high temperatures during the Self
Clean program.
Remove all accessories from the
oven compartment before starting
the Self Clean program. This also
applies to the side racks and any
optional accessories.
76
Coarse soiling in the oven
compartment can cause thick smoke
to develop.
Burnt-on residues can cause lasting
discoloration or matte spots on
enameled surfaces.
Before starting the Self Clean
program, remove coarse soiling from
the oven compartment and scrape
any burnt-on residues off enameled
surfaces with a glass scraper.
 Remove all accessories from the
oven compartment (including the side
racks).

Starting Self Clean

Danger of burning!
The front of the oven gets hotter in
the Self Clean program than it does
in normal oven modes.
Do not let children touch the
appliance during the Self Clean
program.
 Select the Self clean 
(Clean) operating mode.
 
   appears. The number will flash.
Use  or  to choose between the  ,
 , and   Self Clean levels.
 Select the desired Self Clean level.
 Confirm with OK.
The Self Clean program will start.
 will also appear in the display.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hr 1136-3 agHr 1134-3 agHr 1135-3 ag

Table of Contents