Network Setup
This specifies IP address properties of network interface.
You need to have caution because this can limit the connection of the system.
A
A
If you wish to be assigned an automatic IP address : Select 'Get Automatic IP address
(DHCP)' . You need DHCP server(or internet IP router) within the network.
If you have an IP address you want to use : Select 'Manual IP setting' .
- Enter IP address.
- Enter Subnet Mask.
- Specify default Gateway.
If there are no Basic Gateway in the network then enter the IP address.
※ If connection problem arise due to setting, you can change the setting using NAS Detector.
l Setting up LAN
B
69
A
Connect to Network Storage
Web Menu -> Configuration
-> Network Service Setting ->
Basic network setting ->
Click 'LAN1' tab.
B
After checking the wanted
setup method, click on 'Save'
Enter the DNS server by
clicking 'DNS' tab.
※
Manual setting is only for advanced users
with experience in network settings.