Hitachi HF-W6500 Instruction Manual page 229

7. RESTORING THE FACTORY-SHIPPED CONDITION USING A RECOVERY DVD
11. When the restoration process back to the factory-shipped condition performed by the
recovery DVD is fully completed, "Recovery Complete." is displayed in the [Status]
box, and the recovery DVD is automatically ejected. Remove the recovery DVD from
the DVD drive, and then click Exit. The equipment will be shut down.
The system drive of the HF-W6500 Model 55/50 is now successfully restored to the
factory condition by using a recovery DVD. After you finish the procedure above,
follow the instruction in "CHAPTER 3 SETUP" to set up the OS.
7-11