Siemens iQ300 Repair Hints page 120

Repair
4.2 Replacing door handle
Required tools:
Torx Bit TX20 6,3 mm (1/4")
Slotted screwdriver Blade 10 mm x 1.6 mm x 200 mm
Prerequisite:
Appliance is disconnected from power supply.
Door is open.
4.2.1 Removing door handle
▶ 1. Remove two screw caps (1).
2. Unscrew two screws (2).
3. Remove door handle (3).
Door handle is removed.
Door handle for the second door can be removed in the same manner.
4.2.2 Installing door handle
Install in reverse order.
▶
2021-03-10_9001631453
[00340865]
Copyright by BSH Hausgeräte GmbH Page 120 of 529