How To Operate Your Vacuum Cleaner; Schematic Diagram; How To Clean Floor And Carpet - Toshiba VC-GC31CPT Owner's Manual

How to operate your vacuum cleaner

Schematic diagram

Warning

How to clean floor and carpet

1
Check if the dust cup and filter are installed.
2
Pull out the cord straight and insert the plug to the socket outlet.
3
Assemble the hose, telescopic wand and other accessories.
4
Press the power switch to operate the appliance to clean.
5
Turn off the power switch and unplug the appliance after cleaning.
6
Hold the plug and press the cord rewind button to wind up the cord slowly.
Caution
6
VC-GC32,31CP
Power cord
Self-resetting
thermal cut-out
Motor
Do not use the vacuum cleaner without proper installation of the dust
cup and filter.
Clean carpet
Move floor head lightly along the carpet.
Disconnect all the electrical supply and remove the plug if electricity
supply is cut off while using the appliance.
Power switch
Fuse
Clean floor
To increase the cleaning effect and avoid
scratching the floor surface, move floor head
lightly along the floor.