Recorder; Remote Surveillance - Bosch VSS8394/01T Installation Instructions Manual

VSS8394/01T Multiplexer | Installation Manual | Chapter 2
DWELL TIME Change the image sequence
dwell time (programmable
between 02 and 30 secs).
AUDIO SOURCE Selected Audio source is auto-
matically displayed.

2.4.6 Recorder

You can set up the Video Recorder from the system
menu:
MAIN MENU
SYSTEMSETTINGS
RECORDER
PLAYBACK DETECTION
RECORD MODE
MULTIPLEX E R SETUP
PLAYBACK By connecting the input and
output from the same Video
DETECTION
Recorder you can have an auto-
matic playback detection.
ON This allows you to switch on
the Video Recorder playback
and the system will automatically
detect the Video Recorder has
been switched on for playback.
OFF The playback detection is
disabled. You can select the
Video Recorder playback by
accessing the main menu and
selecting
"SWITCH TO PLAYBACK
VIEW"
RECORD MODE FOLLOW DISPLAY
The Video Recorder will record
the same image(s) as displayed
on the monitor, (e.g. if the cam-
era image is changed on the
monitor, this image is also
recorded on the Video
Recorder).
MULTIPLEXING
All camera images are recorded
in a fast sequence at full resolu-
tion.
Bosch Security Systems | 2003-06
All manuals and user guides at all-guides.com
Multiplexer Setup
O N
FOLLOW DISPLAY
Note
The default mode is 1VEXT. For applications where
you want to playback time lapse recordings at real-time
speed, you have to select 2VEXT for recording.

2.4.7 Remote Surveillance

This enables the system to use functionality available
with a remote surveillance unit. Menu and playback
video will be presented on slave output.
MAIN MENU
SYSTEM SETTINGS
R E C O R D E R
MULTIPLEX E R SETUP
AUDIO SOURCE
VID EO OUT
SWITCH C AMERA AFTER
I N T ER L E A V E
ALARM / MOTION OFF
DOORBELL OFF
AUDIO Select the camera from which the
audio will be recorded (camera 1 to
SOURCE
8).
VIDEO OUT The default mode is MULTIPLEX-
ING which is used for recording.
During playback, you can select
FOLLOW PLAYBACK so that the
playback images being displayed
are sent to Video Out.
SWITCH 1VEXT/2VEXT VEXT is a synchroni-
zation pulse coming from the video
CAMERA
recorder to the multiplexer. With
AFTER
every VEXT pulse the Multiplexer
sends the next camera image to the
recorder. If you select 2VEXT, after
2 pulses the next image is sent to
the recorder.
INTER- On / Off In interleave mode an alarm
camera is recorded more frequently.
LEAVE
This provides alarm images with a
higher update rate. For ALARM/
MOTION and DOORBELL activities
you can switch interleaving ON or OFF
and the duration time can be pro-
grammed between 5 sec. and 5 min.
EN | 9
1
MULTIPLEXING
1 VE X T
DURAT I ON
0 5 S EC
0 5 S EC