33. Click the Serial Settings tab and click to check the box for Change Serial Port Settings.
34. Set Serial Settings exactly as shown in the window above.
a. Baud Rate 9600
b. Parity None
c. Data Bits 8
d. Stop Bit 1
e. Flow Control None
f.
UART FIFO Enable
35. Click the Password tab.
36. Select the box Change Password.
37. Honeywell E-Mon recommends using emon (lower case) as the defalt password in the event technical support
requires remote access to configure the E10039 settings.
Fig. 43.
25
EKM-E ETHER-MON KEY DE-211
31-00160—01